Cisco UCS E Series Manuale di risoluzione dei problemi - Pagina 2
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Server Cisco UCS E Series. Cisco UCS E Series 28. Ucs e series unified computing system
Anche per Cisco UCS E Series: Panoramica del prodotto (8 pagine), Manuale di installazione (46 pagine)
Stampa la pagina
General Troubleshooting
General Troubleshooting
Cannot Access the E-Series Server or NCE
See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"
chapter in the
Compute Engine, Release
CIMC Hangs
To resolve this problem, do the following:
• Use IPMI to reboot CIMC. If using IPMI does not resolve the problem, power cycle the E-Series Server.
• Verify that there is an SD card in the SD0 card slot. The SD card in the SD0 card slot contains the CIMC
The below figure shows the location of the SD0 card slot in a single-wide E-Series Server.
Figure 1: Single-Wide E-Series Server
The below figure shows the location of the dual SD card slots in a double-wide E-Series Server.
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
2
CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network
2.x.
software and should always be present.
Overview