Cisco UCS E Series Посібник з усунення несправностей - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Сервер Cisco UCS E Series. Cisco UCS E Series 28 сторінок. Ucs e series unified computing system
Також для Cisco UCS E Series: Огляд продукту (8 сторінок), Посібник з монтажу (46 сторінок)

General Troubleshooting
General Troubleshooting
Cannot Access the E-Series Server or NCE
See the "Troubleshooting E-Series Server or NCE Access Issues" section in the "Firmware Management"
chapter in the
Compute Engine, Release
CIMC Hangs
To resolve this problem, do the following:
• Use IPMI to reboot CIMC. If using IPMI does not resolve the problem, power cycle the E-Series Server.
• Verify that there is an SD card in the SD0 card slot. The SD card in the SD0 card slot contains the CIMC
The below figure shows the location of the SD0 card slot in a single-wide E-Series Server.
Figure 1: Single-Wide E-Series Server
The below figure shows the location of the dual SD card slots in a double-wide E-Series Server.
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
2
CLI Configuration Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network
2.x.
software and should always be present.
Overview