Acuity Brands Aculux AX3 A WDTW Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apparecchiature di illuminazione Acuity Brands Aculux AX3 A WDTW. Acuity Brands Aculux AX3 A WDTW 5. Dmx512 / rdm field

Stampa la pagina
DMX512 / RDM FIELD INSTALLATION MANUAL
Required Materials for Network Installation
Aculux recommends installer seek quotation for start-up/commissioning services from Acuity sales agency or theatrical dealer prior to installation.
– Aculux LED Fixture with DMX512 (abbreviated here as DMX)
– DMX Controller (e.g. Fresco FCS7TSNX or similar)
– RDM Configuration Device (e.g. Fresco FCS7TSNX or DXT1M122M09NE1L)
– DMX/RDM Splitter (Optional, e.g. Fresco DXT1M122M09NE1L)
– Twisted pair, 120ohm, shielded cable (e.g. Belen 9842 or equal)
– Termination Resistor (Pre-installed in every Aculux DMX fixture)
– Small slotted screwdriver
DMX Quick Installation Guide (Downlights Only)
1.
Install Fixtures
and Controller
Product Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/aculux
©2017 Acuity Brands Lighting, Inc.
INSTALLATION INSTRUCTIONS
2.
Terminate Network
Cables
Rev 3/17
P6160
3.
Fixtures in middle
of run
Data out to next fixture
Data in from controller or previous fixture
Fixtures at end
of run
Termination Resistor
Data in from controller or previous fixture
Plug Cables into
Fixtures
1 of 5