Cisco ASR 5000 Manuale di installazione - Pagina 28

Sfoglia online o scarica il pdf Manuale di installazione per Porta d'ingresso Cisco ASR 5000. Cisco ASR 5000 33. Applying power and verifying the installation
Anche per Cisco ASR 5000: Manuale di installazione (18 pagine), Procedura di installazione (8 pagine), Manuale di installazione (37 pagine)

Stampa la pagina

Using the System Diagnostic Utilities

The following displays a sample of this command's output showing a context's ARP table.

Flags codes:

C - Completed, M - Permanent, P - Published, ! - Not answered

T - has requested trailers

Address

10.0.4.2

Using the System Diagnostic Utilities

The system provides protocol monitor and test utilities that are useful when troubleshooting or verifying

configurations. The information generated by these utilities can help identify the root cause of a software or

network configuration issue.

This section describes how to use these utilities.

Important

Using the Monitor Utility

For troubleshooting purposes, the system provides a protocol monitoring utility. This tool displays protocol

information for a particular subscriber session or for every session being processed.

Caution

The monitor tool may cause session processing delays and/or data loss. Therefore, it should be used only

when troubleshooting.

Using the Protocol Monitor

The protocol monitor displays information for every session that is currently being processed. Depending on

the number of protocols monitored, and the number of sessions in progress, a significant amount of data is

generated. You should enable logging on your terminal client to capture all of the information that is generated.

Follow the instructions in this section to invoke and configure the protocol monitoring tool.

Step 1

Invoke the protocol monitor from the Exec mode by entering the monitor protocol command.

host_name

[local]

An output listing all the currently available protocols, each with an assigned number, is displayed.

ASR 5000 System Administration Guide, StarOS Release 21.2

Link Type Link Address

ether

Only an administrator with Operator or higher privilege can run the diagnostic utilities described in this

section.

monitor protocol

Flags

00:05:47:02:20:20

00:05:47:02:03:36

00:01:30:F2:7F:00

Troubleshooting

Mask Interface

SPIO1