Cisco ASR 5000 설치 매뉴얼 - 페이지 28

{카테고리_이름} Cisco ASR 5000에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 5000 33 페이지. Applying power and verifying the installation
Cisco ASR 5000에 대해서도 마찬가지입니다: 설치 매뉴얼 (18 페이지), 설치 절차 (8 페이지), 설치 매뉴얼 (37 페이지)

Cisco ASR 5000 설치 매뉴얼

Using the System Diagnostic Utilities

The following displays a sample of this command's output showing a context's ARP table.
Flags codes:
C - Completed, M - Permanent, P - Published, ! - Not answered
T - has requested trailers
Address
10.0.4.2
10.0.4.2
10.0.4.2
Using the System Diagnostic Utilities
The system provides protocol monitor and test utilities that are useful when troubleshooting or verifying
configurations. The information generated by these utilities can help identify the root cause of a software or
network configuration issue.
This section describes how to use these utilities.
Important

Using the Monitor Utility

For troubleshooting purposes, the system provides a protocol monitoring utility. This tool displays protocol
information for a particular subscriber session or for every session being processed.
Caution
The monitor tool may cause session processing delays and/or data loss. Therefore, it should be used only
when troubleshooting.

Using the Protocol Monitor

The protocol monitor displays information for every session that is currently being processed. Depending on
the number of protocols monitored, and the number of sessions in progress, a significant amount of data is
generated. You should enable logging on your terminal client to capture all of the information that is generated.
Follow the instructions in this section to invoke and configure the protocol monitoring tool.
Step 1
Invoke the protocol monitor from the Exec mode by entering the monitor protocol command.
host_name
[local]
An output listing all the currently available protocols, each with an assigned number, is displayed.
ASR 5000 System Administration Guide, StarOS Release 21.2
28
Link Type Link Address
ether
ether
ether
Only an administrator with Operator or higher privilege can run the diagnostic utilities described in this
section.
monitor protocol
#
Flags
00:05:47:02:20:20
C
00:05:47:02:03:36
C
00:01:30:F2:7F:00
C
Troubleshooting
Mask Interface
SPIO1
SPIO1
SPIO1