Cisco ASR 9000 Series Configurazione - Pagina 11
Sfoglia online o scarica il pdf Configurazione per Porta d'ingresso Cisco ASR 9000 Series. Cisco ASR 9000 Series 46. Line card
Anche per Cisco ASR 9000 Series: Configurazione delle impostazioni di rete (26 pagine), Manuale di configurazione (46 pagine), Manuale di configurazione (50 pagine), Manuale (24 pagine), Manuale (44 pagine), Manuale di riferimento rapido (7 pagine)
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
How to Configure Channelized SONET/SDH
This section contains the following procedures:
•
•
•
•
•
•
Configuring SONET T3 and VT1.5-Mapped T1 Channels
This task explains how to configure a SONET line into T3 and VT-mapped T1 Channels.
Prerequisites
•
•
•
•
•
Restrictions
T1s and E1s are not supported on the Cisco 1-Port Channelized OC-48/STM-16 SPA.
SUMMARY STEPS
1.
2.
3.
4.
OL-26061-03
Configuring SONET T3 and VT1.5-Mapped T1 Channels, page 327
Configuring Packet over SONET Channels, page 332
Configuring a Clear Channel SONET Controller for T3, page 335
Configuring Channelized SONET APS, page 338
Configuring SDH AU-3, page 341
Configuring SDH AU-4, page 349
You should know how to configure the SONET controller as specified in the
Clear Channel SONET Controllers"
on the Cisco ASR 9000 Series Router
STS paths can be channelized into T3s on the following SPAs:
Cisco 1-Port Channelized OC-48/STM-16 SPA
–
Cisco 1-Port Channelized OC-3/STM-1 SPA
–
Cisco 2-Port Channelized OC-12/DS0 SPA
–
STS paths can be channelized into VTG mapped T1s on the following SPA:
–
Cisco 1-Port Channelized OC-3/STM-1 SPA
–
Cisco 2-Port Channelized OC-12/DS0 SPA
T3 paths can be channelized into T1s or E1s on the following SPA:
–
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port Channelized OC-12/DS0 SPA
–
T1 paths can be channelized into NxDS0s on the Cisco 2-Port Channelized OC-12/DS0 SPA.
configure
controller sonet interface-path-id
clock source {internal | line}
framing sonet
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
How to Configure Channelized SONET/SDH
section of the
Configuring Clear Channel SONET Controllers
module.
"How to Configure
HC-327