Cisco RF Gateway 10 Manuale di avvio rapido - Pagina 20

Sfoglia online o scarica il pdf Manuale di avvio rapido per Porta d'ingresso Cisco RF Gateway 10. Cisco RF Gateway 10 41. Cisco systems rf gateway quick start guide

Stampa la pagina

Step 1

Connect one end of the RJ-45 crossover cable to the RJ-45 port (labeled CONSOLE) on the supervisor.

Connect the other end of the cable to the appropriate port on the PC or terminal to complete the console port cable

Step 2

connection.

Management Port

The management port provides an Ethernet port to a LAN for a 10BASE-T and 100BASE-T connection for network

management.

Connect one end of the RJ-45 Ethernet cable to the RJ-45 port (labelled Management on the supervisor card).

Step 1

Connect the other end of the cable to the appropriate port on the PC or console to complete the management port cable

Step 2

connection.

Cabling the Cisco RFGW-10 UEQAM

The following tools are required for the Cisco RFGW-10 coaxial termination:

• 12 universal cable holders UCH2 (supplied in the accessory kit)

• T-10 TORX driver tool

• ¼" flat head screwdriver

• MCX terminated cable bundle (optional)

Figure 14

Universal Cable Holder UCH2

TORX screw

Lock bar

Lead

screw

TORX screw

Red line

Cutout

Shroud

Small pin

Screws into

faceplate

Large pin