Cisco RF Gateway 10 Manuale di avvio rapido - Pagina 18
Sfoglia online o scarica il pdf Manuale di avvio rapido per Porta d'ingresso Cisco RF Gateway 10. Cisco RF Gateway 10 41. Cisco systems rf gateway quick start guide
Stampa la paginaRecommended Tools and Supplies
Table 2 lists the recommended tools and supplies.
Table 2
Recommended Tools and Supplies
Quantity
Description
1
Number 2 Phillips screwdriver
1
Wire-stripping tool
1
Crimping tool
1
2-hole chassis grounding lug
1
Grounding wire
2
Two M5 (metric) phillips head screws
1
Antistatic mat and ESD-wrist strap
10
2-hole Power Supply Lugs
5
Power supply wire
1
10 mm socket wrench
The unit "mm" stands for milli meter.
18
Comments
—
—
This tool must be large enough to accommodate the girth of the
grounding lug when you crimp the grounding cable into the lug.
Included in the accessory kit.
The 90 degree grounding lug has two M5 holes spaced 0.63 in
center to center. If the lug from the accessory kit is misplaced, use
an alternate lug (for example, Panduit LCD6-10AF-L or Pencom
EL1048).
2
6 AWG (16 mm
)
The length of the grounding wires depends on the location of your
chassis within the site and its proximity to proper grounding
facilities.
Included in the accessory kit for use to attach the chassis ground
to the chassis.
—
Included in the accessory kit. Lugs are for power and ground to the
DC PEM.
Panduit LCD4-14AF-L, 2-hole, M6, 90 degree, 4 AWG wire, 0.63
spacing.
4 AWG (25 mm2)
This is used for securing the M6 nuts on the PS DC inputs and
ground terminals.