Cisco RF Gateway 10 빠른 시작 매뉴얼 - 페이지 18
{카테고리_이름} Cisco RF Gateway 10에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RF Gateway 10 41 페이지. Cisco systems rf gateway quick start guide
페이지 인쇄Recommended Tools and Supplies
Table 2 lists the recommended tools and supplies.
Table 2
Recommended Tools and Supplies
Quantity
Description
1
Number 2 Phillips screwdriver
1
Wire-stripping tool
1
Crimping tool
1
2-hole chassis grounding lug
1
Grounding wire
2
Two M5 (metric) phillips head screws
1
Antistatic mat and ESD-wrist strap
10
2-hole Power Supply Lugs
5
Power supply wire
1
10 mm socket wrench
The unit "mm" stands for milli meter.
18
Comments
—
—
This tool must be large enough to accommodate the girth of the
grounding lug when you crimp the grounding cable into the lug.
Included in the accessory kit.
The 90 degree grounding lug has two M5 holes spaced 0.63 in
center to center. If the lug from the accessory kit is misplaced, use
an alternate lug (for example, Panduit LCD6-10AF-L or Pencom
EL1048).
2
6 AWG (16 mm
)
The length of the grounding wires depends on the location of your
chassis within the site and its proximity to proper grounding
facilities.
Included in the accessory kit for use to attach the chassis ground
to the chassis.
—
Included in the accessory kit. Lugs are for power and ground to the
DC PEM.
Panduit LCD4-14AF-L, 2-hole, M6, 90 degree, 4 AWG wire, 0.63
spacing.
4 AWG (25 mm2)
This is used for securing the M6 nuts on the PS DC inputs and
ground terminals.