Cisco SM-X-8FXS/12FXO Manuale di installazione dell'hardware - Pagina 38
Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Porta d'ingresso Cisco SM-X-8FXS/12FXO. Cisco SM-X-8FXS/12FXO 40. Voice gateway
Stampa la pagina
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Alternative Connections to Terminal and Modem
Auxiliary
Port
(DTE, RJ-45)
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
Alternative Connections to Terminal and Modem
Your Cisco VG400 Voice Gateway ships with an RJ-45-to-RJ-45 rollover cable and two adapters for connection
to a PC, a terminal, or a modem. If you want to use an RJ-45 straight-through cable or other adapters, see
Table A-4 for usable cable and adapter combinations.
Table 10: Alternative Terminal and Modem Connections
Cisco VG400 Port Connection
Console port to PC
Auxiliary port to modem
4
5
Gigabit Ethernet Port Pinouts (RJ-45)
Figure A-4 shows the RJ-45 connector wiring for the Gigabit Ethernet cable; Table A-4 lists the pinouts.
Note
Pinout shown is for category 3, 4, or 5 10/100BASE-T connection to an Gigabit Ethernet switch.
Cisco VG400 Voice Gateway Hardware Installation Guide
36
RJ-45-to-RJ-45
RJ-45-to-DB-25
Rollover Cable
Adapter
"MODEM"
1
8
2
7
3
6
4
5
5
4
6
3
7
2
8
1
An octal cable or RJ-45 breakout cable is equivalent to a rollover cable.
Modify the DB-25 adapter by removing the wire in pin 6 and placing it in the pin 8 position.
Modem Port
(DCE,
DB-25)
8
7
6
5
4
3
2
1
RJ-45 Type Cable
Straight-through
4
Rollover
Straight-through
Cable Specifications and Information
4
RTS
20
DTR
2
TxD
7
GND
7
GND
3
RxD
8
DCD
5
CTS
Adapter
DCE, DB-9 female
5
DCE
, DB-25, male
DTE2, DB-25, male