Motorola CP 140 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Radio bidirezionale Motorola CP 140. Motorola CP 140 26. Uhf2 (438-470mhz)
Anche per Motorola CP 140: Manuale d'uso di base (16 pagine), Manuale d'uso di base (16 pagine), Manuale d'uso di base (18 pagine), Manuale di servizio dettagliato (28 pagine), Manuale di installazione di Cps/Tuner (6 pagine), Informazioni sul servizio (46 pagine), Informazioni sul servizio (46 pagine)

Stampa la pagina
Motorola CP 140 Manuale d'uso

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must preprogram a
button to access this feature.
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been pre-prgrammed
by your dealer/programmer as your
designated scan channel, a priority
channel, or the last remaining channel
in the scan list.
English
22

Restore Channels to the Scan List

1
Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
–
–
1
Press the preprogrammed Scan button to stop
the scan.
2
Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
–
–
1
Select a channel that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.