Motorola CP 140 User Manual - Page 24

Browse online or download pdf User Manual for Two-Way Radio Motorola CP 140. Motorola CP 140 26 pages. Uhf2 (438-470mhz)
Also for Motorola CP 140: Basic User's Manual (16 pages), Basic User's Manual (16 pages), Basic User's Manual (18 pages), Detailed Service Manual (28 pages), Cps/Tuner Installation Manual (6 pages), Service Information (46 pages), Service Information (46 pages)

Motorola CP 140 User Manual

DELETE A NUISANCE CHANNEL

Note: Your dealer/programmer must preprogram a
button to access this feature.
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been pre-prgrammed
by your dealer/programmer as your
designated scan channel, a priority
channel, or the last remaining channel
in the scan list.
English
22

Restore Channels to the Scan List

1
Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
1
Press the preprogrammed Scan button to stop
the scan.
2
Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
1
Select a channel that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.