Motorola GP328 Scheda di riferimento rapido - Pagina 19
Sfoglia online o scarica il pdf Scheda di riferimento rapido per Radio bidirezionale Motorola GP328. Motorola GP328 23. Professional two-way radio
Anche per Motorola GP328: Specifiche (2 pagine), Specifiche tecniche (4 pagine), Manuale operativo (1 pagine), Manuale d'uso (30 pagine)
Stampa la pagina
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into a scan list. Each channel
can share the same scan list or have different
scan lists assigned to them.
Once the radioÕs scan operation is activated and
the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING A SCAN
OPERATION
The LED Indicator will blink (green) during a
scan operation. It will stop blinking when the
radio switches to a channel.
1.
Press the Scan key to start a scan operation.
2.
Press the Scan key again to stop the scan
operation.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT before the
programmed hang-time ends. Check with your
dealer for details.
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted
calls/noise, you can temporarily remove it from
the scan list by performing a Nuisance Channel
Delete operation.
1.
While the radio is on the Nuisance Channel,
press and hold the Scan key until you hear a
tone.
2.
Release the Scan key.
NOTE: You cannot perform a Nuisance Channel
Delete on a priority channel or if there is only
one remaining channel in the scan list.
ADDING A DELETED NUISANCE
CHANNEL BACK TO THE SCAN
LIST
1.
Press the Scan key to stop the scan opera-
tion.
2.
Press the Scan key again to re-start the scan
operation.
Scan
15
English