Motorola MBP25/2 Manuale d'uso - Pagina 18
Sfoglia online o scarica il pdf Manuale d'uso per Baby Monitor Motorola MBP25/2. Motorola MBP25/2 27. Digital video baby monitor
Anche per Motorola MBP25/2: Manuale d'uso (30 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (6 pagine), Manuale di avvio rapido (8 pagine)
7. Help
Display
No Display
• Try recharging or replacing the battery pack.
• Reset the units. Disconnect the battery pack of the parent unit and unplug
both the units' electrical power, then plug them back in.
• Is the unit turned on?
• Press and hold the ON/OFF button P on the parent unit to turn it ON.
• Is the correct camera selected?
• Change the camera number, if necessary.
• Is the video display turned on?
• Press the VIDEO ON/OFF button V to turn it on.
• When operating using batteries only, the Display will go blank after about
4 minutes to save power. The unit is still active and will give you audio alerts.
You can reactivate the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the battery pack.
• If the Baby Unit is too far away it may be going out of range, so move the
Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Baby Unit and the Parent Unit to synchronise.
• See 2.4 "Registration (Pairing)" , if there is a need to re-register the units.
Interference Noise
Interference on your parent unit
• Your baby and parent units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6 feet (1 to 2 metres) between the 2 units to
avoid audio feedback.
18
Help