ARGSeguridad ZDAS-300 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di sicurezza ARGSeguridad ZDAS-300. ARGSeguridad ZDAS-300 16. Luxury voiced lcd alarm system

ARGSeguridad ZDAS-300 Manuale d'uso
Zone 3 selected
SET
The above shows that the No 3 zone configured to be a Entry/Exit, Active Sounder when
Arming and there are sensors in this zone.
Zone 8 selected
SET
The above shows No 8 zone configured, a watchdog zone (24 hour armed), there
are Sensors in this Zone.
BasicFlow chart for registering devices,sSet zone type,set system configuration
and program C.S. phone numbes and site code in disarmed mode.
25
M
D
H
M
D
TYPE
M
D
H
M
D
TYPE
The above chart shows the basic principle of operation of the System. The security
system contains alarm panel, remote key fob, pir detectors, door/window magnetic contact
and high decibel integral siren Also available are some optional Devices such as wired/
wireless Smoke detectors, Gas detector, Flood detector, Temperature detector.The wireless
detector Communicates to the Control Panel by radio on 433 MHZ Frequency and each
detector has an approximate range of 50 Metres dependent on the Local Environments.
The wired detector are also workable.

1.3 Component Parts

The wired/Wireless Alarm Panel:
This 8 Zone Alarm panel is the central information processor of the system, receiving
and dealing with all the Alarm Signals from the various Detectors. It also contains the
central Station communicator and By-directional Audio Verification mechanism.
Everything you need to know about the security system is displayed on the panel keypad
LCD. The zones, 24 Hours, Armed, Part armed, Disarmed and the important Messages
regarding system status are displayed on the LCD screen. See section 2.1 and 2.2
Wireless Remote Key Fob:
The remote key fob is used to Arm,part arm,disarm the system or to request Assistance
from the C.S. This could mean the summoning of the Emergency Services such as Police,
Fire, Ambulance or just a member of the family. It is also used in the Programming and
device registration for system access.

1.4 Optional Extra Detectors available

Wired/Wireless Magnetic Door / Window contact: (option)
The Magnetic Door contact is used to detect the opening of doors or windows. When
activated it will transmit an alarm signal to the Control Panel to indicate a door or window
has been compromised. It consists of detector with an integrated wireless transmitter and
magnet.
Wired/Wireless PIR detector: (option)
The Passive Infrared detector responds to mobile body heat emissions. If anyone enters
the area of an Armed Zone, once the infrared detector in that Armed Zone detects their
presence it will transmit an alarm signal to the Control Panel.
2