Dimplex BF8000ST Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Camino da interno Dimplex BF8000ST. Dimplex BF8000ST 17. 26” self trimming fireplace
Anche per Dimplex BF8000ST: Manuale d'uso (16 pagine), Manuale di servizio (16 pagine)

Stampa la pagina

Fireplace Installation

wide x 22 ⅞ in. (580 mm) high

x 8 ¾ in. (222 mm) deep. The

fireplace does not require any

additional venting (Figure 1).

Fireplace Assembly

The only assembly required is

to slide the front glass onto the

fireplace and install hardware to

keep it in place.

1. Remove fireplace and glass

carefully from the carton,

discard the plastic bag and

foam packaging.

2. Remove the foam block from

within the fireplace (Figure 2).

3. Using side cutters or scissors,

cut and remove the two cable

ties as shown in Figure 1 and

Figure 2

Cable

Ties

Figure 3

Foam

Block

remove the cardboard that

protects the log set.

4. Remove the right hand side

trim by removing four Phillips

screws at the side of the

fireplace.

5. Place the Front Glass onto

the track of the fireplace

(Figure 3) and slide it along

the front until it reaches the

far left of the unit.

6. Re-attach the right hand trim

piece using the four Philips

screws from step 4.

Mantel Installation

Install the fireplace assembly

into the mantel (refer to mantel

assembly instructions).

Track

Front

Glass

Trim