Dimplex BF8000ST Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Крытый камин Dimplex BF8000ST. Dimplex BF8000ST 17 страниц. 26” self trimming fireplace
Также для Dimplex BF8000ST: Руководство пользователя (16 страниц), Руководство по эксплуатации (16 страниц)
Печатать страницуFireplace Installation
wide x 22 ⅞ in. (580 mm) high
x 8 ¾ in. (222 mm) deep. The
fireplace does not require any
additional venting (Figure 1).
Fireplace Assembly
The only assembly required is
to slide the front glass onto the
fireplace and install hardware to
keep it in place.
1. Remove fireplace and glass
carefully from the carton,
discard the plastic bag and
foam packaging.
2. Remove the foam block from
within the fireplace (Figure 2).
3. Using side cutters or scissors,
cut and remove the two cable
ties as shown in Figure 1 and
Figure 2
Cable
Ties
Figure 3
Foam
Block
remove the cardboard that
protects the log set.
4. Remove the right hand side
trim by removing four Phillips
screws at the side of the
fireplace.
5. Place the Front Glass onto
the track of the fireplace
(Figure 3) and slide it along
the front until it reaches the
far left of the unit.
6. Re-attach the right hand trim
piece using the four Philips
screws from step 4.
Mantel Installation
Install the fireplace assembly
into the mantel (refer to mantel
assembly instructions).
Track
Front
Glass
Trim
7