Epson PowerLite 460 Manuale di sostituzione - Pagina 2

Sfoglia online o scarica il pdf Manuale di sostituzione per Software Epson PowerLite 460. Epson PowerLite 460 4. Lamp and status information
Anche per Epson PowerLite 460: Manuale operativo (47 pagine), Manuale di configurazione rapida (4 pagine), Manuale d'uso (1 pagine), Elenco delle parti (1 pagine), Manuale d'uso (25 pagine), Specifiche tecniche (4 pagine), Manuale di installazione (2 pagine), Manuale di manutenzione (2 pagine)

Epson PowerLite 460 Manuale di sostituzione
Epson PowerLite 450W / 460
warning
Let the lamp cool fully
before replacing it.
In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury. If the projector has
been installed on the ceiling,
you should stand to the side
of the lamp cover, not
underneath it.
If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.
Follow these steps to replace the lamp:
1. Turn o the projector and unplug the power cord.
2. Let the projector cool for at least an hour (if it has been on). The
lamp is extremely hot immediately after use.
3. Loosen the lamp cover screw (you cannot remove it). Then slide
the lamp cover o .
4. Loosen the two screws holding the lamp in place (you can't
remove them).
INSTALLATION HANDBOOK
Lamp and Status Information
Loosen, but don't
remove these screws
2