Epson PowerLite 460 Vervangingshandleiding - Pagina 2

Blader online of download pdf Vervangingshandleiding voor {categorie_naam} Epson PowerLite 460. Epson PowerLite 460 4 pagina's. Lamp and status information
Ook voor Epson PowerLite 460: Bedieningshandleiding (47 pagina's), Handleiding voor snelle installatie (4 pagina's), Gebruikershandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Gebruikershandleiding (25 pagina's), Specificaties (4 pagina's), Installatie Handboek (2 pagina's), Onderhoudshandleiding (2 pagina's)

Epson PowerLite 450W / 460

warning

Let the lamp cool fully

before replacing it.

In the unlikely event that

the lamp has broken, small

glass fragments may be

present and should be

removed carefully to avoid

injury. If the projector has

been installed on the ceiling,

you should stand to the side

of the lamp cover, not

underneath it.

If the lamp is used after the

replacement period has

passed, the possibility that

the lamp may break

increases. When a lamp

replacement message

appears, replace the lamp

with a new one as soon as

possible, even if it is still

working.

Follow these steps to replace the lamp:

1. Turn o the projector and unplug the power cord.

2. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

3. Loosen the lamp cover screw (you cannot remove it). Then slide

the lamp cover o .

4. Loosen the two screws holding the lamp in place (you can't

remove them).

INSTALLATION HANDBOOK

Lamp and Status Information

Loosen, but don't

remove these screws