Setting Timers, Setting Date/Time
•
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.
Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.
•
When no module is inserted, "
module detected" message appears on the screen.
•
Refer to the module instruction manual for details
of the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select the Settings icon by
using Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.
Timers
Sets timers for selected programmes. Press MENU
button and select Settings by using Left or Right
button. Press OK button to continue. Use Up or
Down button to select Timers and then press OK
button to continue.
Setting Sleep Timer
The television can be set to turn itself Off after a
certain length of time.
•
Highlight Sleep Timer by using
button.
•
Use
Left or Right button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Setting Programme Timers
This feature will set the television to go to a specifi c
channel at a certain time. It can be used to view
a particular programme, or by setting the mode
to daily or weekly, can be used to view a series of
programmes.
Press Down button to set timers on an event.
Programme timer function buttons will be displayed
on the screen.
Adding a Timer
•
Press
YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes channel by using Left or Right.
40BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 33
40BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 33
Timer/Record Type: This feature is unavailable to
be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
No Common Interface
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily
or Weekly. Use Left or Right buttons to select an
option.
Change/Delete: Controls parental settings on timers.
•
•
•
•
•
•
Up or Down
•
•
•
- 33 -
Press
GREEN button to save the timer. Press RED
button to cancel.
Editing a Timer
Select the timer you want to edit by pressing
Down button.
When fi nished with editing, press
save. You can press MENU button to cancel.
Deleting a Timer
Select the timer you want to delete by pressing
or Down button.
Press
RED button.
Select
YES by using Left or Right buttons to delete
the timer. Select NO to cancel.
Confi guring Date/Time Settings
You can confi gure date/time preferences by using
this menu screen.
Select
Date/Time in the Settings menu to confi gure
Date/Time settings. Press OK button.
Use
Up or Down buttons to highlight an option.
Use
Left or Right buttons to change a setting and
press MENU to exit.
Up or
GREEN button to
Up
21.01.2012 18:06:25
21.01.2012 18:06:25
Stampa la pagina