Epson Stylus Pro 4880 Portrait Edition Manuale di riferimento rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di riferimento rapido per Software Epson Stylus Pro 4880 Portrait Edition. Epson Stylus Pro 4880 Portrait Edition 12. Warranty statement
Anche per Epson Stylus Pro 4880 Portrait Edition: Opuscolo (1 pagine), Scheda tecnica (6 pagine), Opuscolo e specifiche (6 pagine), Manuale di configurazione (16 pagine), Manuale di rete (46 pagine), Manuale di installazione (4 pagine), Manuale informativo sul prodotto (16 pagine), Garanzia limitata (12 pagine)

Loading Paper in the Tray

Make sure the printer is on and roll paper is not loaded

for printing.

If your paper size is A3 or larger, pull out the paper

tray and cover.

Lift up the paper tray cover.

Flip up the paper guide roller and slide the edge

guide all the way to the left.

Thumb through a stack of paper, then gently tap it

on a flat surface to even the pages.

Load the sheets in the portrait orientation, short

edge first, with the printable side face-down. Place

the paper all the way back, against the right side of

the tray.

Don't load paper above the arrow mark inside the

edge guide.

Caution:

When you add more paper, always line up

the edges with the paper already in the tray.

Adjust the paper tray and edge guide according to

the paper size. For sheets smaller than A3, raise the

paper guide and move it to the edge of the stack.

Flip down the paper guide roller, adjust the length

of the paper tray cover (if necessary), then replace

the paper tray cover.

Note:

Make sure the roll paper support is

not raised.

Press the paper source button until you see the

cut sheet icon.