Toshiba TDP-MT200 Manuale d'uso - Pagina 34

Sfoglia online o scarica il pdf Manuale d'uso per Proiettore Toshiba TDP-MT200. Toshiba TDP-MT200 44. Dlp projector
Anche per Toshiba TDP-MT200: Manuale d'uso (46 pagine)

Stampa la pagina

Lamp replacement (Continued)

Unplug power cord.

Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the 1 screw, then pull up to the direc-

tion of the arrow with your fingers as shown to

remove the lamp cover. Use care to avoid any

damage to nails and/or tip of your finger(s). If

you have any difficulty in removal, you can use

a screwdriver or any other smaller tool for your

convenience.

Pull out the lamp.

Loosen the 2 screws holding the lamp in place,

and pull up the handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down until the bottom is

reached, and lock in place using the two lamp

locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the

screws loosened in step

no longer loose.

Reset the lamp timer.

See the lamp's manual for instructions on resetting

the lamp timer.

Notes and Precautions

• Press the

button twice to display (a rough guide) the time of lamp use, the Lamp time

item, in the Status display menu.

• It is recommended that the lamp be replaced after 2,000 hours of use. When Lamp time

reaches 2,000 hours, the

when you press

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

lamp may fail to come on

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

until the lamp cover is

p.32

icon and a message will appear. This display disappears

button.

p.36

, and the lamp's lifetime may be shortened.

Lamp cover