Toshiba TDP-MT200 Manuale d'uso - Pagina 36

Sfoglia online o scarica il pdf Manuale d'uso per Proiettore Toshiba TDP-MT200. Toshiba TDP-MT200 44. Dlp projector
Anche per Toshiba TDP-MT200: Manuale d'uso (46 pagine)

Stampa la pagina

Others

Trouble indications

The indicator lights inform you of internal abnormalities.

No power

(Off)

Lamp went out during use, or won't come on

(Red lit)

Power went out during use

(Red lit or flashing)

(Green lit)

Or (Orange lit)

(Red lit)

Power went out during use

(Red lit or flashing)

Or (Orange lit)

(Red lit)

Power went out during use

(Green lit

or Off)

(Green lit

(Green

or Off)

flashing)

(Red lit)

PRECAUTION

• Make sure to unplug the power cord if something goes wrong.

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

⇒ The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of

the lamp has ended or the projector is malfunctioning.

• Unplug the power cord and wait for a short while, then turn the power back on.

• If a lamp burns out, replace it with a new one.

After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

⇒ Internal overheating, or the outside temperature is too high.

• Place the projector so that the air intake and exhaust are not blocked.

• Unplug the power cord and wait for a short while, then turn the power back on.

The

icon will appear before the power goes out.

After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

⇒ Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

The

icon will appear before the power goes out.

After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

⇒ Problem inside the projector.

• Unplug the power cord and wait for a short while, then turn the power back on.

• If the above action will not clear the problem, unplug the power cord,

and contact your dealer.

After approx. one minute of abnormal display, the projector returns to

the standby state waiting for internal cool down.

p.34