CRU Forensic Labdock S5 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Immagazzinamento CRU Forensic Labdock S5. CRU Forensic Labdock S5 10.

Stampa la pagina

Forensic LabDock S5 and U5 User Manual

REAR OF THE S5 FLDs MODEL

SATA Data Connector

For Front SATA/IDE

Connections

Power Connector

FRONT OF THE U5 MODEL

Error

USB Write-Block

Indicator

Status LED

USB

Write-Blocked

Remount

USB Connector

Button

Power Fail

Fan Fail

HPA/DCO

Indicator

Molex

power connector

REAR OF THE U5 MODEL

SATA Data Connector

For Front SATA/IDE

Connections

Power Connector

Protecting Your Digital Assets

SATA & PATA

Firmware

Configuration Port

SAS Pass-through

Data Connector to

RedPort HBA Card

Write-Blocked

Drive

IDE Connector

Activity LED

IDE/SATA

Power

Write-Block

Status LED

Hard Drive

Power

Cubby

Switch

Write-Blocked

eSATA Connector

SATA & PATA

Firmware

Configuration Port

Write-Blocked USB

Pass-through Connector

1.3 LED BEHAVIOR

LED

Power

Drive Activity

Error

Indicator

Power Fail

Indicator

HPA/DCO

Indicator

Fan Fail

LED

Indicator

USB Write-

Block Status

IDE/SATA

Write-Block

Status

* This LED appears only on the Forensic LabDock U5.

1.4 WARNINGS AND NOTICES

Please read the following before beginning installation.

General Care

•

The main circuit board of the Forensic LabDock is sus-

ceptible to static electricity. Proper grounding is strongly

recommended to prevent electrical damage to the enclo-

sure or other connected devices, including the computer

host. Avoid all dramatic movement, tapping on the unit,

and vibration.

•

Avoid placing the hard drives close to magnetic devices,

high voltage devices, or near a heat source. This includes

any place where the product will be subject to direct

sunlight. Do NOT allow water to make contact with the

drive or the Forensic LabDock.

COLOR

STATE

DESCRIPTION

The Forensic LabDock

Green

Solid

is powered on.

Solid or

The attached drive is

Amber

Blinking

being accessed.

The attached drive has

reached 131°F/55°C,

Red

Solid

or an HPA/DCO-related

disk command has

failed.

There is a problem with

either the +5V or +12V

Red

Solid

power output to the

attached drive.

An HPA or DCO area

has been detected.

Amber

Solid

Once lit, it will not be

unlit until the LabDock's

power is cycled.

The cooling fan has

stopped working and

Red

Solid

needs replaced. Please

contact CRU Technical

Support.

The attached USB de-

Amber

Solid

vice is write-blocked.

The attached IDE or

Amber

Solid

SATA drive is write-

blocked.