Pioneer VSX-5400 Manuale di istruzioni per l'uso - Pagina 29
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ricevitore stereo Pioneer VSX-5400. Pioneer VSX-5400 47. Audio/video stereo receiver
Anche per Pioneer VSX-5400: Manuale di servizio (37 pagine)
Stampa la pagina
VSX-5400 REMOTE CONTROL OPERATION
VSX- 5500S | remote control | operation.
Refer
to
P.35 for
an
explanation | "Of
LOADING BATTERIES
4. Open the battery compartment cover on the rear of the remote
control unit. The cover should open easily if you slide it in the
direction of the arrow while pressing on it with your thumb.
2, Take out the two supplied batteries (RO3/UM-4)}, and insert them
into the battery compartment in accordance with the indications
in the compartment.
3. Close the cover of the battery compartment.
fl
incorrect use of batteries may lead to leakage or rupture.
Always be sure to follow these guidelines:
aA.
Always insert batteries into the battery compartment correctly matching
the positive (+) and negative {—) polarities, as indicated inside the
campartment.
B.
Never mix new and used batteries.
g.
Batteries of the same size may have different voltages, depending on
their type. Do not mix different type of batteries.
REMOTE CONTROL RANGE
When operating the remote control unit, point the front of the unit at
the front panel of the receiver.
The remote control unit may be used
within a range of about 7 meters {23 feet) from the remote sensor,
within angles of up to about 30 degrees.
7m (23 feet)
DB
Battery Replacement
When the batteries have run out, the transmit indicator will not illuminate
even when a key is pressed. Be sure to replace the batteries as soon
as possible. As the programmed functions will be retained in memory
only as long as batteries are inserted, remove the old batteries only if
they can be replaced by new ones immediately.
Also, be sure to always use the specified batteries (RO3/UM-4 batteries).
29
<ARB1II74>