- ページ 29

ステレオ・レシーバー Pioneer VSX-5400のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-5400 47 ページ。 Audio/video stereo receiver
Pioneer VSX-5400 にも：サービスマニュアル (37 ページ)

ページを印刷する

VSX-5400 REMOTE CONTROL OPERATION

VSX- 5500S | remote control | operation.

Refer

P.35 for

explanation | "Of

LOADING BATTERIES

4. Open the battery compartment cover on the rear of the remote

control unit. The cover should open easily if you slide it in the

direction of the arrow while pressing on it with your thumb.

2, Take out the two supplied batteries (RO3/UM-4)}, and insert them

into the battery compartment in accordance with the indications

in the compartment.

3. Close the cover of the battery compartment.

incorrect use of batteries may lead to leakage or rupture.

Always be sure to follow these guidelines:

aA.

Always insert batteries into the battery compartment correctly matching

the positive (+) and negative {—) polarities, as indicated inside the

campartment.

Never mix new and used batteries.

Batteries of the same size may have different voltages, depending on

their type. Do not mix different type of batteries.

REMOTE CONTROL RANGE

When operating the remote control unit, point the front of the unit at

the front panel of the receiver.

The remote control unit may be used

within a range of about 7 meters {23 feet) from the remote sensor,

within angles of up to about 30 degrees.

7m (23 feet)

Battery Replacement

When the batteries have run out, the transmit indicator will not illuminate

even when a key is pressed. Be sure to replace the batteries as soon

as possible. As the programmed functions will be retained in memory

only as long as batteries are inserted, remove the old batteries only if

they can be replaced by new ones immediately.

Also, be sure to always use the specified batteries (RO3/UM-4 batteries).