Pioneer A-757 Manuale di istruzioni per l'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Amplificatore Pioneer A-757. Pioneer A-757 13.
Anche per Pioneer A-757: Manuale di istruzioni per l'uso (14 pagine)
Stampa la pagina
PANEL FACILITIES
© ADPT 1/TAPE 3 switch/indicator
(ADPT/TAPE 3 switch in the A-656)
Use this switch to listen to tape playback, or to listen to the
sounds being recorded during tape recording.
ON:
The indicator lights: Press when listening to the playback sound of
the tape deck or the adaptor connected
to the ADPT 1/TAPE 3
IN/PLAY terminals, or to monitor the sound being recorded on the
tape deck connected to the ADPT 1/TAPE 3 OUT/REC terminals.
OFF:
The indicator goes off: Normally leave the switch in this position.
NOTE:
When the DIRECT switch is set to ON, this function does not
operate and no signal is output at the ADPT 1/TAPE 3 OUT/REC
terminals.
@ DIRECT switch/indicator
Use this switch when you do not wish to pass the output from input
terminal
equipment
through
the
various
frequency
adjusting
circuits and adaptor terminals (ADPT 1/TAPE 3, ADPT 2, BASS,
TREBLE, BALANCE, LOUDNESS).
ON:
When the switch is in this position, the indicator lights and the
signals input from the input terminals
are reproduced without
passing
through
the various frequency-adjusting circuits. This
results in flat, pure sound which is a more faithful reproduction of
the input source.
OFF:
When the switch is in this position the indicator goes out and the
signal passes through the various frequency adjusting circuits.
@ PHONO SELECTOR switch
Set in accordance with the type of cartridge used in you turntable.
MM:
Set to this position when using a moving magnet cartridge, or a
MC (moving coil) cartridge with high output of 1 mV or more.
MC:
Set to this position when using a moving coil cartridge.
MM SUBSONIC/MC SUBSONIC:
Subsonic filter for moving coil or moving magnet cartridges to cut
ultralow frequency noise less than 17 Hz generated when playing
a warped record.
When using a high-output moving coil cartridge, set this switch to
MM or MM SUBSONIC.
@ VOLUME CONTROL
Use to adjust volume level.
NOTE:
This unit is equipped with a circuit that attenuates the effect of tone
and loudness controls at volume is turned up.
@ MUTING switch/indicator (A-757 only)
Use to temporarily cut sound volume.
ON:
The indicator lights. The sound volume will be cut off.
OFF:
The indicator goes off. The sound will return to its previous volume.
@ INPUT SELECTOR switch
Use to select playback source.
LINE:
Set to this position when
listening to the programs
from
a
component connected to the LINE terminals.
TUNER:
Set to this position when listening to AM or FM broadcasts with a
tuner,
-
PHONO:
Set
to this
position
when
listening
to record
playback
on
a
turntable.
cD:
Set to this position when listening to a compact disc playback with
aCbD player.
DAT/TAPE 1:
For playback with a tape deck or digital audio tape deck connected
to the DAT/TAPE 1 terminals.
TAPE 2:
For playback with a tape deck connected to the TAPE 2 terminals.
® REC SELECTOR switch
Switch to select recording signal. When set at other than SOURCE
or OFF position, signals can be recorded during playback of the
equipment selected by INPUT SELECTOR switch.
TUNER:
To record from a TUNER.
cD:
To record from a CD player.
OFF:
In this position nothing from the REC terminals of DAT/TAPE 1 and
TAPE 2 will be output. Select it when not recording; output to tape
decks will be disconnected, improving sound quality.
SOURCE:
To record the equipment selected by INPUT SELECTOR switch.
TAPE:
12
To record (copy) from the tape deck of DAT/TAPE
1 terminals,
over to the tape deck of TAPE 2 terminals.
21
To record (copy) from the tape deck of TAPE 2 terminals, over to
the tape deck of DAT/TAPE 1 terminals.
NOTE:
The REC SELECTOR switch has no effect on the recording out put
of the ADPT 1/TAPE 3 terminals.
z
<ARB1175>
E