Dinan Tronics D440-0052 Manuale di istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Ricambi per auto Dinan Tronics D440-0052. Dinan Tronics D440-0052 7.

11. Route the DINANTronics harness to sensor #3, located at the end of the fuel rail.

12. The fuel rail pressure sensor connection could be one of two configurations. Please

examine your harness connector and compare it to the photos below. One style is

a D-shape, while the other style is an oval-shape. If you do not have the correct

harness for your vehicle, please contact Dinan for an exchange -- do not continue

with installation

Contact Dinan if your stock harness has this

connector -- do not install this harness.

13. Like the previous sensors, install the DINANTronics harness in between the fuel rail

pressure sensor and the factory wiring harness. The connectors are unique, and can

only be installed one way. Make sure that the locking tangs on both connections are

secure.

14. The DINANTronics ECU may be mounted at the location shown in the first photo.

INS440-0052

If your stock harness has this connector,

then you may continue with installation.

Page 5 of 7

Rev 9/18/17