Dinan Tronics D440-0052 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} Dinan Tronics D440-0052에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinan Tronics D440-0052 7 페이지.
페이지 인쇄11. Route the DINANTronics harness to sensor #3, located at the end of the fuel rail.
12. The fuel rail pressure sensor connection could be one of two configurations. Please
examine your harness connector and compare it to the photos below. One style is
a D-shape, while the other style is an oval-shape. If you do not have the correct
harness for your vehicle, please contact Dinan for an exchange -- do not continue
with installation
Contact Dinan if your stock harness has this
connector -- do not install this harness.
13. Like the previous sensors, install the DINANTronics harness in between the fuel rail
pressure sensor and the factory wiring harness. The connectors are unique, and can
only be installed one way. Make sure that the locking tangs on both connections are
secure.
14. The DINANTronics ECU may be mounted at the location shown in the first photo.
INS440-0052
#3
If your stock harness has this connector,
then you may continue with installation.
Page 5 of 7
Rev 9/18/17