Dinan Tronics D440-0052 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Dinan Tronics D440-0052에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinan Tronics D440-0052 7 페이지.

15. Route the DINANTronics harness to the desired ECU location, taking care to:

 Avoid all moving engine components or areas of extreme heat.

 Ensure adequate slack in the wiring harness to allow for engine movement.

 Use some of the included zip-ties to secure the harness as needed.

16. Connect harness to DINANTronics ECU. Take care to ensure that the connection

is securely latched.

17. Use the included double-sided Velcro tape to attach the ECU to the plastic cover.

18. Reinstall the air intake duct & engine cover.

19. Reconnect negative terminal of battery.

DINANTronics BYPASS PLUG:

20. A bypass plug is included in this kit. This plug allows you to return the car to stock

tuning, without removing the DINANTronics harness from the vehicle.

 Should stock tuning be desired, follow the steps in the "Prepare Vehicle for

Installation" section; disconnect the DINANTronics ECU; and attach bypass plug

to the Dinan harness.

DINANTronics REGISTRATION:

21. On the DINANTRONICS ECU is a white identification label which displays the

MAC address of this ECU. The MAC address is a series of 16 letters & numbers.

Take note of the MAC address, as it will be needed to register your ECU with

Dinan.

22. Completely fill out the DINANTronics Product Registration page at the end of this

section. Submit this information to Dinan by visiting the webpage at

"http://decus.dinancars.com/retail", or you may fax or email the registration page

instead.

23. Enjoy!

INS440-0052

Page 6 of 7

Rev 9/18/17