Dinan Tronics D440-0052 Інструкція з монтажу Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні запчастини Dinan Tronics D440-0052. Dinan Tronics D440-0052 7 сторінок.
Друкувати сторінку15. Route the DINANTronics harness to the desired ECU location, taking care to:
Avoid all moving engine components or areas of extreme heat.
Ensure adequate slack in the wiring harness to allow for engine movement.
Use some of the included zip-ties to secure the harness as needed.
16. Connect harness to DINANTronics ECU. Take care to ensure that the connection
is securely latched.
17. Use the included double-sided Velcro tape to attach the ECU to the plastic cover.
18. Reinstall the air intake duct & engine cover.
19. Reconnect negative terminal of battery.
DINANTronics BYPASS PLUG:
20. A bypass plug is included in this kit. This plug allows you to return the car to stock
tuning, without removing the DINANTronics harness from the vehicle.
Should stock tuning be desired, follow the steps in the "Prepare Vehicle for
Installation" section; disconnect the DINANTronics ECU; and attach bypass plug
to the Dinan harness.
DINANTronics REGISTRATION:
21. On the DINANTRONICS ECU is a white identification label which displays the
MAC address of this ECU. The MAC address is a series of 16 letters & numbers.
Take note of the MAC address, as it will be needed to register your ECU with
Dinan.
22. Completely fill out the DINANTronics Product Registration page at the end of this
section. Submit this information to Dinan by visiting the webpage at
"http://decus.dinancars.com/retail", or you may fax or email the registration page
instead.
23. Enjoy!
INS440-0052
Page 6 of 7
Rev 9/18/17