Ariston microGENUS II 31 MFFI Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Caldaia Ariston microGENUS II 31 MFFI. Ariston microGENUS II 31 MFFI 8.

Ariston microGENUS II 31 MFFI Manuale d'uso

7. DIGITAL PROGRAMMER

Manual switch
Reset
Enter
switching
times
Imput
time
weekday/s
Summer and
winter time
setting
Enter
the hours
Week-
days
flash
Enter
minutes
Day
Enter
Automatic
Operation
= ON
= OFF
The switching
times corres-
pond to the
program
entered.
Operating the time switch
The step marked with the symbol "
switching program.
Preparing for Operation
Activate the "Res" switch (=RESET) to reset the time switch to its
default setting (activate using a pencil or similar pointed instrument). Do
this:
- every time you wish to "reset" the time switch
- to erase all switching times and the current time of day.
After approximately two seconds the following display appears:
Enter current time and weekday
- Keep the "
" key pressed down
During the summer time period press the +/- 1h key once.
Enter the hour using the "h" key
Enter the minutes using the "m" key
Enter the day using the "Day" key
1 = "Monday"..............7 = Sunday
- Release the "
" key.
Entering the switching times
You have 20 memory Iocations available. Each switching time takes up
one memory location.
Keep pressing the "Prog" key until a free memory location is shown in
the display "– –:– –".
Programme ON or OFF with the "
" "= OFF; "
"= ON
Enter the hour using "h"
Enter the minutes using "m"
If a switching command is to be carried out every day (1 2 3 4 5 6 7)
then store using the " " key, otherwise select the day(s) it is to be
carried out by using the "Day" key.
When the day seIection is left bIank, the programmed switching
instruction operates at the
1 2 3 4 5 6
= Monday – Saturday
1 2 3 4 5
= Monday – Friday
6 7
=Saturday – Sunday
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the " " key.
The time switch enters the automatic operating mode and displays the
current time of day.
Manual
Continuous
Operation
Operation
= ON
= OFF
If the current
You can only
switching mode is
return to automatic
changed manually,
mode from the
the next switching
continuously-ON
time will be
and continuously-
carried out auto-
OFF
matically again
modes by
according to the
pressing the "
entered switching
key.
program.
" are necessary to carry out a
" key:
same time every day
= Continuously ON
= Continuously OFF
switching
"
7