Ariston microGENUS II 31 MFFI Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Котел Ariston microGENUS II 31 MFFI. Ariston microGENUS II 31 MFFI 8 сторінок.
Друкувати сторінку
7. DIGITAL PROGRAMMER
Manual switch
Reset
Enter
switching
times
Imput
time
weekday/s
Summer and
winter time
setting
Enter
the hours
Week-
days
flash
Enter
minutes
Day
Enter
Automatic
Operation
= ON
= OFF
The switching
times corres-
pond to the
program
entered.
Operating the time switch
The step marked with the symbol "
switching program.
Preparing for Operation
Activate the "Res" switch (=RESET) to reset the time switch to its
default setting (activate using a pencil or similar pointed instrument). Do
this:
- every time you wish to "reset" the time switch
- to erase all switching times and the current time of day.
After approximately two seconds the following display appears:
Enter current time and weekday
- Keep the "
" key pressed down
During the summer time period press the +/- 1h key once.
Enter the hour using the "h" key
Enter the minutes using the "m" key
Enter the day using the "Day" key
1 = "Monday"..............7 = Sunday
- Release the "
" key.
Entering the switching times
You have 20 memory Iocations available. Each switching time takes up
one memory location.
Keep pressing the "Prog" key until a free memory location is shown in
the display "– –:– –".
Programme ON or OFF with the "
"
"= OFF; "
"= ON
Enter the hour using "h"
Enter the minutes using "m"
If a switching command is to be carried out every day (1 2 3 4 5 6 7)
then store using the "
" key, otherwise select the day(s) it is to be
carried out by using the "Day" key.
When the day seIection is left bIank, the programmed switching
instruction operates at the
1 2 3 4 5 6
= Monday – Saturday
1 2 3 4 5
= Monday – Friday
6 7
=Saturday – Sunday
Selection of single days: 1 = Mon. .............. 2 =Tues.
Save the switching time with the "
" key.
The time switch enters the automatic operating mode and displays the
current time of day.
Manual
Continuous
Operation
Operation
= ON
= OFF
If the current
You can only
switching mode is
return to automatic
changed manually,
mode from the
the next switching
continuously-ON
time will be
and continuously-
carried out auto-
OFF
matically again
modes by
according to the
pressing the "
entered switching
key.
program.
" are necessary to carry out a
" key:
same time every day
= Continuously ON
= Continuously OFF
switching
"
7