Whirlpool 8212 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Lavatrice Whirlpool 8212. Whirlpool 8212 4.

TROUBLESHOOTING

Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in a few

minutes.

Malfunction

Possible cause

The plug is not inserted into the socket.

The tumble

The plug is faulty.

dryer does not

turn on.

A power failure occurred.

The door has not been closed properly.

A time delay was set to the start of the cycle.

The tumble

The "Start/Pause" button was not pressed in

dryer does not

order to start the programme.

start.

The Key Lock function was enabled (for

machines equipped with this option).

Small load.

Garments are

wet at cycle

completion.

Large loads or heavier fabrics

An appropriate maintenance was not carried

out.

The programme, the time and/or the drying

level set are not suitable for the type and the

The drying

amount of load inserted into the dryer.

times are very

long.

The garments are too wet.

The dryer may be overloaded.

The programme

A power failure might have occurred.

did not end.

Drum - slight

Slight odour or vapour may be found if you

odour or

open the door during its fi rst use.

vapour.

Lights on or fl ashing

Water tank

The water tank is full.

Failure of the air fl ow necessary for machine

Door fi lter

operation.

The condenser unit requires cleaning.

The light on is not a malfunction but just a

Condenser unit

reminder to carry on this activity periodically

(monthly).

The presence

of wrench

The machine sensors detected a failure.

symbol signals a

malfunction.

Policies, standard documentation, ordering of spare parts and additional product information can be

found by:

• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.

The model information can be retrieved using the QR Code indicated on the energylabel. The label also

includes the model identifi er that can be used to consult the https://eprel.ec.europa.eu database portal.

Solution

Insert the plug into the socket.

Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, such as adapters or

extensions.

Wait for the power supply to be restored and switch the fuse on again

if necessary.

Close the door.

For machines equipped with this function: wait for the set delay to

end or switch the machine off to reset it. Refer to the Options section.

Press the "Start/Pause" button.

Refer to the Options section and if Key Lock was selected, disable it.

Switching the machine off is not enough to disable this option.

The automatic programme has not sensed the required fi nal moisture

so that the dryer completes the programme and stops. If this happens

simply select an additional short period of drying or select extra dry

option if available.

Dryness levels can be modifi ed to the specifi c dryness desired.

Extra Dry is recommended for ready to wear items.

Refer to the Care & Maintenace section and perform the operations

described.

Refer to Programmes and Options sections to fi nd the programme

and options most suitable for the type of load.

Carry out a washing cycle with higher spin speed to remove as much

water as possible.

Refer to the Programmes section to check the max load for each

programme.

In case of power failure, it is necessary to press the "Start/Pause"

button to restart the cycle.

This is normal and should only last a few minutes.

Empty the water tank. Refer to the Care & Maintenance section.

Clean the door fi lter and check whether air intake is free. Carrying

out these operations improperly may cause damages. Refer to Care &

Maintenance section.

Clean the condenser unit. Refer to Care & Maintenance section.

Switch the dryer off and unplug it. Open the door immediately and

pull the laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits fl ashing on the display.

For instance: F3 and E2

xxxx

xxxxxxxxxxxx

19516191500

10/ 2021

W11540594