Whirlpool 8212 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пральна машина Whirlpool 8212. Whirlpool 8212 4 сторінки.
Друкувати сторінкуTROUBLESHOOTING
Before contacting the After-sales Service, refer to the table below. Often the malfunctions are minor and can be solved in a few
minutes.
Malfunction
Possible cause
The plug is not inserted into the socket.
The tumble
The plug is faulty.
dryer does not
turn on.
A power failure occurred.
The door has not been closed properly.
A time delay was set to the start of the cycle.
The tumble
The "Start/Pause" button was not pressed in
dryer does not
order to start the programme.
start.
The Key Lock function was enabled (for
machines equipped with this option).
Small load.
Garments are
wet at cycle
completion.
Large loads or heavier fabrics
An appropriate maintenance was not carried
out.
The programme, the time and/or the drying
level set are not suitable for the type and the
The drying
amount of load inserted into the dryer.
times are very
long.
The garments are too wet.
The dryer may be overloaded.
The programme
A power failure might have occurred.
did not end.
Drum - slight
Slight odour or vapour may be found if you
odour or
open the door during its fi rst use.
vapour.
Lights on or fl ashing
Water tank
The water tank is full.
Failure of the air fl ow necessary for machine
Door fi lter
operation.
The condenser unit requires cleaning.
The light on is not a malfunction but just a
Condenser unit
reminder to carry on this activity periodically
(monthly).
The presence
of wrench
The machine sensors detected a failure.
symbol signals a
malfunction.
Policies, standard documentation, ordering of spare parts and additional product information can be
found by:
• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identifi cation plate.
The model information can be retrieved using the QR Code indicated on the energylabel. The label also
includes the model identifi er that can be used to consult the https://eprel.ec.europa.eu database portal.
Solution
Insert the plug into the socket.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, such as adapters or
extensions.
Wait for the power supply to be restored and switch the fuse on again
if necessary.
Close the door.
For machines equipped with this function: wait for the set delay to
end or switch the machine off to reset it. Refer to the Options section.
Press the "Start/Pause" button.
Refer to the Options section and if Key Lock was selected, disable it.
Switching the machine off is not enough to disable this option.
The automatic programme has not sensed the required fi nal moisture
so that the dryer completes the programme and stops. If this happens
simply select an additional short period of drying or select extra dry
option if available.
Dryness levels can be modifi ed to the specifi c dryness desired.
Extra Dry is recommended for ready to wear items.
Refer to the Care & Maintenace section and perform the operations
described.
Refer to Programmes and Options sections to fi nd the programme
and options most suitable for the type of load.
Carry out a washing cycle with higher spin speed to remove as much
water as possible.
Refer to the Programmes section to check the max load for each
programme.
In case of power failure, it is necessary to press the "Start/Pause"
button to restart the cycle.
This is normal and should only last a few minutes.
Empty the water tank. Refer to the Care & Maintenance section.
Clean the door fi lter and check whether air intake is free. Carrying
out these operations improperly may cause damages. Refer to Care &
Maintenance section.
Clean the condenser unit. Refer to Care & Maintenance section.
Switch the dryer off and unplug it. Open the door immediately and
pull the laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits fl ashing on the display.
For instance: F3 and E2
xxxx
xxxxxxxxxxxx
19516191500
10/ 2021
W11540594