Whirlpool AKR 672/IX Manuale - Pagina 31

Sfoglia online o scarica il pdf Manuale per Cappa di ventilazione Whirlpool AKR 672/IX. Whirlpool AKR 672/IX 36.

Stampa la pagina

DESCRIPTION OF HOOD

1. Control panel.

Light

move the switch to the right or press the button to switch

on.

Extraction speed

Move the switch to the right or press the next button to

increase extraction speed (or open the electric shutter )

2. Grease filter (the number of grease filters may vary,

depending on the model).

3. Grease filter handle.

4. Lamp covers (the number and position of lamps and/or

lamp covers may vary, depending on the model).

5. Telescopic flue.

6. Air vent (Filter version only).

Grease filters:

Metal grease filters have an unlimited life

and should be washed once a month

either by hand or in a dishwasher at a

low temperature and with a short cycle.

Washing in a dishwasher can cause

grease filters to turn white, but this in no

way affects efficiency.

Removing the filter: push the spring release handle

backwards (b) then remove the filter downwards (a).

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

5019 300 01026

Carbon filters (filter hoods only):

Change the carbon filter every four months.

It cannot be washed or regenerated.

Fitting or replacing the carbon filter (filter hoods only).

1. Remove the grease filters.

2.Fit the filter/s over the motor: make sure the pins R on the

manifold match the slots S, then turn clockwise until locked.

3. Refit the grease filters.

Replacing bulbs

Disconnect the appliance from the power supply.

Warning! Make sure lamps are cold before touching them.

1. Remove the clip that secures the lamp cover, then prise off

using a small screwdriver or other suitable tool.

2. Replace the burnt-out bulb. Use a 40W max (E14) bulb

only.

3. Refit the lamp cover and secure in place with the clip.

Note: the lamp can also be accessed by removing the grease

filters, but removing the lamp in this way is more difficult.

RUS

UKR