Whirlpool UXD8630DYS Istruzioni per l'installazione e manuale d'uso e manutenzione - Pagina 15

Sfoglia online o scarica il pdf Istruzioni per l'installazione e manuale d'uso e manutenzione per Cappa di ventilazione Whirlpool UXD8630DYS. Whirlpool UXD8630DYS 44. 30 76.2 cm and 36 91.4 cm retractable pop-up downdraft vent system
Anche per Whirlpool UXD8630DYS: Istruzioni per l'installazione e manuale d'uso e manutenzione (36 pagine), Installazione Istruzioni per l'uso e la cura (40 pagine)

5. Install the left and right undercounter mounting brackets to

the vent box. Slide the keyhole slots over the guide tabs and

push the brackets up to set them in place.

A. Vent box

B. Undercounter mounting bracket

C. Keyhole slots

D. Guide tabs

6. Drill 2 pilot holes through each of the undercounter mounting

brackets into the underside of the countertop. Using 2 screws

(not provided) of the appropriate length, mount the brackets to

the countertop.

IMPORTANT: Select a screw length that will not allow the

screws to go through the countertop when tightened.

A. Screws

B. Backsplash

C. Countertop

7. Check that the downdraft vent is level as shown below.

Loosen the lower support leg screws and position the

legs against the cabinet floor.

A. Downdraft

B. Level

8. Fasten the lower support legs to the cabinet floor with

screws (not provided).

A. Screw (not provided)

9. Tighten the lower support leg screws.

10. Attach the left and right end caps to the vent box. Place the

tab into the mounting slot at each end of the downdraft vent,

as shown, and push down to lock into place.

A. End cap tab

B. Mounting slot