ALcom SYMPHONY 2200 Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Telefono cordless ALcom SYMPHONY 2200. ALcom SYMPHONY 2200 2.

Stampa la pagina

TECHNICAL DETAILS

Standard

Frequency

Operating range

USER GUIDE

Operating time

Symphony22 0 system

Temperature range

Electrical power

CLEANING AND CARE

Do not clean any part of your Symphony2200 system with benzene thinners

or other solvent chemicals as this may cause permanent damage which is not

covered by the Guarantee.

When necessary, clean it with a damp cloth.

Keep your Symphony2200 system away from hot, humid conditions or

strong sunlight,and don't let it get wet.

Every effort has been made to ensure high standards of reliability for your

ymphony22 0 system

repair it yourself consult your supplier or the Helpline.

not try to

Digital Cordless Telephone

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING

EMERGENCY TELEPHONE CALLS WHEN THE POWER

FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE

MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

To use your handset and base together, you must be able to establish a radio link

GETTING TO KNOW YOUR PHONE

between them. The signal between the handset and the base is in accordance

with the normal standards for a DECT phone: Maximum range up to 300 metres

3.1

Handset Overview

outdoors or 50 metres indoors.

UP/CALL LIST

The signal range may decrease if there is any large metal object between the

In idle mode:

handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic

Press to access the call list

In menu mode:

doors or reinforced concrete. The signal strength may also be reduced by other

Press to scroll up the

solid structures like walls, or by other radio or electrical interference.

menu items

In Phonebook list /

INSTALLING YOUR PHONE

Redial list /

Call List:

2.1

Connecting the base station

Press to scroll up the list

During a call:

1) Plug the power supply

and line cord

into

Press to increase the

earpiece or speaker volume

the base station.

During ringing:

2) Always use the cables provided in the box

Press to increase the

ringer volume

Warning: Use only the provided adaptor, using

other power supplies may cause a hazard.

LEFT SOFT KEY(MENU/OK)

In idle mode:Press

Warning: Install the base unit in a position where the mains adapter plug

to access the main menu

will reach an easily accessible mains socket. Never try to lengthen the

In sub-menu mode:

mains power cable.

Press to confirm the selection

During a call: Press to access

Note: The base unit needs mains power for normal operation, not just for

Intercom/Phonebook/ Redial

charging the handset batteries.

List/ Call List

TALK ON

2.2

Installing and charging the batteries

In idle / predialing mode:

1) Place the 2 supplied batteries into the battery

Press to make a call

compartment

with the polarity markings as shown

In Redial list / Call List /

Phonebook

list

Use only the NiMH rechargeable battery type provided.

Press to make a call to the

2) Position the battery compartment cover over the batteries

display

ed entry in the list

During ringing:

and slide up to

click into place.

Press to answer a call

3) Put the handset on the base and charge for

15 hours before using the handset for the first time.

PHONEBOOK

The handset will give a beep when it

is properly placed on the base or charger.

In idle mode: Press to access

the phonebook list

If you have a Broadband line

Keypad lock

If you connect your telephone to a line with

Press and hold to lock/

a broadband connection, you will need to

unlock

keypad.

Press and hold to toggle between

insert a micro-filter between the telephone

the external and internal

and the telephone line, otherwise you may get

calls when both are set up.

interference between the telephone and the broadband,

which could cause problems.

In a home with broadband, every telephone must have a micro-filter connected,

not just the one at the telephone point that your modem is connected to.

If you need more broadband micro-filters, contact your broadband supplier.

USING YOUR PHONE

4.3

End a Call

During a call press <TALK OFF> to end the call.

4.1

Make a Call

4.1.1

Preparatory Dialing

Put the handset on the base station or charger to end the call.

Enter the phone number and press <TALK ON> or <SPEAKERPHONE> to

4.4

Adjust Volume

connect to the line and

dial the number. When entering the number, if you

make a mistake, press <C>

to delete digits.

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece

volume.

4.1.2

Direct Dialing

During a call:

Press <TALK ON> or <SPEAKERPHONE> to connect to the line and then

enter the phone number.

ress <UP/DOWN> to select volume 1-5. The current

When you end the call, the setting will remain at the last selected level.

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

4.5

Mute a Call

4.1.3

Call from the phonebook

You can talk to someone nearby without letting the caller hear you during a call.

Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to

select the desired phonebook entry.

During a call:

Press <C> to mute the microphone and "MUTED" will display on the LCD.

Press <TALK ON>

or <SPEA ERPHONE>

to dial out the selected phonebook entry.

Your caller cannot hear you. Press <C> again to unmute the microphone.

Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,

4.6

Turn off

Note: The alphanumeric keys provide a short-cut to find entries beginning with

In idle, press and hold <HASH/#> to turn off the handset ringer. The "RINGER

the corresponding letters.

OFF"

icon is displayed on the LCD.

4.1.4

Call from the Call List (only available with Caller Display)

Note: The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off

Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Call List entry.

To turn the ringer back on, press and hold <HASH/#> again.

Press <TALK ON>

or <SP AKERPHONE>

to dial out the selected Call List entry.

4.7

Turn on the Keypad Lock

Note: You can also access the Call List by pressing <MENU/OK> twice.

In idle, press and hold <STAR/*> to turn on the keypad

4.1.5

Call from the redial list

LOCK"

icon is displayed on the LCD.

Press <DOWN> to access the redial list and press <UP/DOWN> to select the

Note: You can still use <TALK ON> to answer a call

desired redial number.

when the

Press <TALK ON> or <SPEAKERPHONE> to dial out the selected redial number.

To turn the keypad lock off, press and hold <STAR/*> again.

4.1.6

Call timer

4.8

Redial the last number

Your handset automatically times the duration of every call.

You can redial any of the

The call timer is displayed as soon as you answer a call or 15

seconds after

the phonebook to go with the number, the name will be displayed instead.

dialling

and remains on the screen

for 5 seconds after

the end of the call.

The most recent last number will display at the top of the redial list.

It is shown in hours, minutes and seconds

format (HH:MM:SS).

4.8.1

Redial a Number from the Redial List

4.2

Answer a Call

1. In idle mode, press <DOWN> to access the redial list.

If the handset is not on the charging cradle:

Note: If the redial list entry shows a name, press <Hash/#> to view the number

When the phone rings, press <TALK ON>

or <SPEAKERPHONE>

to answer

of this entry.

a call.

2. Press <UP/DOWN> to browse the redial list.

Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

3. Press <TALK ON> or <SPEAKERPHONE> to dial to the selected redial number.

charger will answer the call automatically, and no buttons need to be

Note: If there are no numbers in the redial list, the display shows " EMPTY " .

pressed.

Digital Enhanced Cordless

Telecommunication (DECT)

1 IMPORTANT SAFETY INSTRUCTIONS...........................................................

1.8GHz

2 INSTALLING YOUR PHONE ............................................................................ 5

Up to 300m outdoors;

2.1 C ONNECTING THE BASE STATION .......................................................................... 5

up to 50m indoors

2.2 I NSTALLING AND CHARGING THE BATTERIES ...................................................... 5

Standby: 100 hours

3 GETTING TO KNOW YOUR PHONE ................................................................ 6

Talking: 10 hours

Battery charge time:15 hours

3.1 H ANDSET O VERVIEW ................................................................................................ 6

3.2 B ASE S TATION O VERVIEW .....................................................................................

Operating 0 C to 40 C

D ISPLAY I CONS AND S YMBOLS ............................................................................... 7

Storage -20 C to 60 C

M ENU S TRUCTURE ....................................................................................................

T EXT AND D IGIT E NTRY T ABLE ................................................................................ 9

2pcs x 1.2V 500mAH NiMH rechargeable

3.5.1

LATIN C

HARACTER S ET ......................................................................................... 9

AAA size battery cells

3.5.

2 P LISH CHARACTER SET......................................................................................

3.5.

NORWEGIAN CHARACTER SET............................................................................ 10

Base Unit/Charge Pod

3.5.

4 GREEK CHARACTER SET.....................................................................................

Input 6V DC, 300mA --

4 USING YOUR PHONE ......................................................................................1

4.1 M AKE A C ALL ............................................................................................................. 1

4.1.1 P REPARATORY D IALING .........................................................................................1

4.1.2 D IRECT D IALING .......................................................................................................1

4.1.3 C ALL FROM THE PHONEBOOK ...............................................................................1 1

4.1.4 C ALL FROM THE C ALL L IST

4.1.5 C ALL FROM THE REDIAL LIST

4.1.6 C ALL TIMER ..............................................................................................................1

4.2 A NSWER A C ALL ....................................................................................................... 1

4.3 E ND A C ALL ................................................................................................................ 1

4.4 A DJUST E ARPIECE V OLUME .................................................................................... 1

4.5 M UTE A C ALL ............................................................................................................. 1

4.6

TURN OFF HANDSET RINGER

However, if something does go wrong, please

4.7 T URN ON THE K EYPAD L OCK ................................................................................... 1

4.8 R EDIAL THE LAST NUMBER ..................................................................................... 1

4.8.1 R EDIAL A N UMBER FROM THE R EDIAL L IST .........................................................1

4.8.2 S TORE A R EDIAL N UMBER INTO THE P HONEBOOK ............................................1

4.8.3 D ELETE A R EDIAL N UMBER ....................................................................................1

4.8.4 D ELETE

ALL REDIAL LIST ENTRIES

4.9 F IND THE H ANDSET ................................................................................................... 1

4.10 M AKE AN I NTERNAL C ALL(FOR MULTI-HANDSET VERSIONS ONLY ) ................ . 1

4.10.1 I NTERCOM A NOTHER H ANDSET ..........................................................................1

4.10.2 C ALL A LL H ANDSETS .............................................................................................1

4.10.3 T RANSFER AN E XTERNAL C ALL TO ANOTHER HANDSET ................................1

4.10.4 M AKE A 3- WAY C ONFERENCE C ALL ....................................................................1

5 PRIVATE PHONEBOOK ...................................................................................1

5.1 A DD A N EW P HONEBOOK E NTRY ........................................................................... 1

5.2 S EARCH A P HONEBOOK E NTRY .............................................................................. 1

5.3 V IEW A P HONEBOOK E NTRY ................................................................................... 1

3.2

Base Station Overview

PAGE

Press the Page button on the base station to

page your handset(s).

SPEAKERPHONE

RIGHT SOFT KEY(CLEAR/BACK/

During a call:

It will ring for approximately 60 seconds.

MUTE/INTERCOM)

Press to turn on / off the

Press and hold to put base into registration mode.

In main menu mode: Press to go back to

speakerphone.

idle screen

Call List / Phonebook entry :

CHARGING CRADLE

In sub-menu mode: Press to go back to

Press to make a call with

previous level

speakerphone

CHARGE LED

During ringing:

In sub-menu mode: Press and hold to go

Press to answer a call

back to idle screen

Light on when the handset is being charged.

with speakerphone

In editing / predialing mode: Press to clear

Online LED

During answering machine message

a character / digit

playback / call screening:

In editing / predialing mode:

Light on when the

line is seized.

Press to play message via speaker

Press and hold to delete all the

3.3

Display Icons and Symbols

characters / digits

During a call: Press to mute/ unmute the

The LCD display gives you information on the current status of the telephone.

microphone

In idle mode:Press to intercom another

handset

TALK OFF

During a call: Press to end a call and go

back to idle screen

In menu / editing mode: Press to go back

to previous menu

Scroll up / down the menu items / Phonebook list / Redial list / Call List

In idle mode:

Steady when the handset is in range of the base. Flashes when out of

Press and hold to power off the handset

range of the base or not registered to the base.

In idle mode (when the handset is powered

off): Press and hold to power

on the handset.

Steady when an intercom call is in progress.

RECALL(also called FLASH)

Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

When you get a busy line,

press R button

to get a new dial tone.

Indicate that handsfree is being used.

Press R button to answer call waiting line.

(second call) press R button again to

Indicates that the ringer is switched off.

get back to the first line.

Steady when an alarm is set. Flashes when the alarm is sounding.

DOWN/REDIAL

Indicates that the keypad is locked.

In idle mode:Press to access the redial list

Indicates when you have a new Voice Mail message.

In menu mode:

(This function needs the network support and not available

Press to scroll down the menu items

In Phonebook list / Redial list / Call List:

in Singapore.)

Press to scroll down the list

During a call:

Indicates when the battery is fully charged.

(

)

RINGER OFF

Press to decrease the earpiece

or speaker

Press and hold to turn the

Whole icon flashes when the battery performs charging.

volume

handset ringer off.

During ringing:

Internal block icon flashes when the battery is in final charging stage.

Press to decrease the ringer volume

4.8.2

Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will

be played when browsing the ringtone list. (Note: the selected melody will

only be played if you subscribe to Caller Display and the incoming number

setting is shown.

matches the stored number.)

7. Press <OK> to confirm, and the entry will be stored.

4.8.3

Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm, and the entry will be deleted.

the

Handset Ringer

4.8.4

Delete all Redial List entries

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

4.9

Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the

handsets registered to the base will produce the paging tone and show

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

handset is ringing.

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

incoming call instead of paging.

last numbers called. If you have stored a name in

4.10 Make an Internal Call (For users purchased more than 1 set)

This feature is only applicable when there are at least two registered handsets.

It allows you to make internal calls, transfer external calls from one handset to

another handset and make conference calls. If the called handset is not

answered within 60 seconds, the called handset will stop ringing and the calling

handset will return to standby mode.

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display

TABLE OF CONTENTS

5.4 E DIT A P HONEBOOK E NTRY .................................................................................... 1

5.5 D ELETE A P HONEBOOK E NTRY .............................................................................. 1

5.6 D ELETE

ALL PHONEBOOK ENTRIES.......................................................................1

5.7 C HECK THE P HONEBOOK U SAGE .......................................................................... 1

6 CALLER DISPLAY (NETWORK DEPENDENT)...............................................1

6.1 V IEW THE C ALL L IST ................................................................................................. 1

6.2 S TORE A C ALL L IST N UMBER INTO THE P HONEBOOK ........................................ 1

6.3 D ELETE AN ENTRY IN THE C ALL L IST .................................................................... 1

6.4 D ELETE

ALL CALL LIST ENTRIES

................

7 PHONE SETTINGS ...........................................................................................1

7.1 D ATE AND T IME S ETTINGS ...................................................................................... 1

7.1.1 C HANGE THE D ATE F ORMAT ................................................................................. 1

7.1.2 C HANGE THE T IME F ORMAT .................................................................................. 1

7.1.3 S ET THE T IME ........................................................................................................... 1

7.1.4 S ET THE D ATE .......................................................................................................... 1

7.2 A LARM S ETTINGS ......................................................................................................

7.2.1 T URN ON / OFF THE A LARM ..................................................................................... 19

7.2.2 S ET THE A LARM T IME ............................................................................................. 19

7.3 H ANDSET S ETTINGS .................................................................................................

7.3.1 S ET THE R INGER

MELODY

FOR I NTERNAL C ALLS ........................

7.3.2 S ET THE R INGER MELODY FOR E XTERNAL C ALLS ............................................

7.3.3 S ET THE R INGER V OLUME .....................................................................................

7.3.4 S ET A LERT T ONES ...................................................................................................

7.3.5 S ET THE H ANDSET L ANGUAGE .............................................................................

7.3.6 R ENAME THE H ANDSET ..........................................................................................

7.3.7 C HOOSE THE I NFORMATION TO BE D ISPLAYED IN I DLE ...................................

(ONLY AVAILABLE WITH CALLER DISPLAY)

...

...... 1 1

7.3.8 S ET THE A UTO A NSWER ........................................................................................

................................................................................ 1

7.4 B ASE S ETTINGS ........................................................................................................ 21

7.4.

D E - REGISTER A H ANDSET ..................................................................................... 21

7.4.

C HANGE THE DIAL MODE .......................................................................................

7.4.

C HANGE THE F LASH (RECALL) T IME .....................................................................

7.4.

C HANGE THE S YSTEM PIN C ODE ......................................................................... 22

7.5 R EGISTRATION .......................................................................................................... 23

................................................................................... 1

7.6 R ESET Y OUR P HONE ................................................................................................ 23

TROUBLESHOOTING ...................................................................................

DECLARATION OF CONFORMITY .............................................................

.....................................................................................

GUARANTEE AND SERVICE

........................................................................1

Indicates when the battery needs charging.

Flashes when low battery power level is detected.

Indicates when there are more characters or numbers in front of those

being displayed.

Indicates when there are more characters or numbers in front of those

being displayed.

Indicates when there are more characters or numbers after those being

displayed.

Press the MENU/OK key to access the main menu.

Press the MENU/OK key to confirm the current selection.

Press the C/MUTE key to start an intercom call.

(INT)

Press the C/MUTE key to go back to the previous menu level or cancel

(BACK)

the current action.

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

the microphone during a call.

3.4

Menu Structure

In idle mode, press <MENU/OK>

to go to CALL LIST, the first option in the menu list.

Press <UP> or <DOWN> to go to other options in the menu list.

Press <OK> to enter a sub-menu or function.

Press <Back> to go back to the previous level.

Refer to the following for the menu structure.

<UP/

Key Press

<MENU>

DOWN>

Main

CALL LIST PHONEBOOK BS

SETTINGS

Sub

ALARM

Shows EMPTY

DELETE HS

or the first Call

or the first

DIAL MODE

RING SETUP

TONE SETUP

List Entry. Then

phonebook Entry.

FLASH TIME

Then <OK> for:

CHANGE PIN

LANGUAGE

<OK> for:

ADD TO PB

ADD

RENAME HS

DELETE

PB STATUS

HS DISPLAY

DELETE ALL

AUTO ANSWER

DATE & TIME

DETAILS

ADD

VIEW

EDIT

DELETE

DELETE ALL

PB STATUS

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT> and all the other registered handset

numbers will display, along with a "9".

2. Enter the number of the handset that you want to call, or enter "9" to call all

handsets.

3. The called handset rings and <TALK ON> must be

pressed on that handset

to establish the intercom call.

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

Note: If there is an external call while you are on an intercom call, you'll

hear warning beeps, and you have to end the intercom all, before you can

answer the external call.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press <KEY 9> to ring to all registered handsets

4.10.3 Transfer an External Call to another handset

During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM.

2. Press <OK> to show all the other registered handset numbers, plus "9".

Enter the number for the handset you want to transfer the call to.

3. The external call is put on hold automatically and the called handset rings.

4. Press <TALK ON> on the called handset to establish

an internal call.

5. Press <TALK OFF> on the calling handset or put the calling handset on the

charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

Note: If the other handset has not answered the intercom call, you can stop

the intercom and return to the external call by pressing <TALK OFF>

4.10.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two

handsets (in intercom).

The three parties can share the conversation and no additional network

subscription is required.

During an external call:

1. Follow Steps 1 to 4 in section 4.10.3.

"NOT POSSIBLE"

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the

other handset still connected to the external call.

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

following:

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

....................................................... 1

Keep your S

ymphony2200

away from hot, humid conditions or strong sunlight,

and don't let it get wet or u

se this product

near water (for example, near

a bath tub, kitchen

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

Centre under the following conditions:

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

....

.................

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) NEVER use your S

ymphony22 0

outdoors during a thunderstorm-unplug the

base from the telephone line and the mains socket when there are storms

in your area. Damage caused by l ightning is not covered by the guarantee.

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation

periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells

can be dangerous. These may cause interference and/or damage to the unit

.............................................................

or surroundings. The manufacturer will not be held liable for damage arising

.............................................................

from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the batteries are inserted in the correct polarity.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put

them where they could get punctured.

3.5

Text and Digit Entry Table

The following table shows you where each letter and punctuation character can

be found, by using repeated presses of the alphanumeric keypad. This will be

helpful when storing a name in the phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry position.

It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

3.5.1

Latin Cha racter Set

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Key Press 1st

3rd 4th 5th 6th 7th 8th 9th 10th

space

(

)

<UP/

DOWN>

REGISTRATION DEFAULT

PIN? - - - -

PRIVATE PHONEBOOK

Each handset can store

up to 0 private phonebook entries with names and

numbers. Each phonebook entry can have a maximum of 20 digits for the

phone number and 12 characters for the name. You can also select different

ringtones for your phonebook entries. (Note: the different ringtones only play if

you subscribe to Caller Display and the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

5.1

Add a New Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

phonebook entry.

6. Press <OK> to store the phonebook entry.

5.2

Search a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Enter the first letter of the name using the alphanumeric keys(e.g. if it

begins with C, press the 2 key three times),

and then <UP/DOWN> to scroll to the entry you

want.

5.3

View a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select VIEW.

4. Press <OK> and <UP/DOWN> to review the name, number and ringtone

of the selected phonebook entry.

Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or

<RIGHT SOFT KEY> to view the remaining digits.

Package contents

The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 2 AAA rechargeable batteries

• 1 User manual

Note: If you have a Twin, Triple or Quad system, you will also have the requisite

extra handset(s) and batter

ies

, and a charger pod for each extra handset.

3.5.

2 Polish Character Set

Alphanumeric Editing

Number Editing (For phone

Key

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

0, P (Pause)

3.5.3 Norwegian Character Set

Number Editing (For phone

Alphanumeric Editing

Number Editing (For phone

Key

number editing,date/time editing)

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

0, P (Pause)

0, or P (Pause) if press and hold

3.5.4 Greek Character Set

Alphanumeric Editing

Number Editing (For phone

(For phonebook name editing and renaming handset)

editing, date/time editing)

Key Press 1st

3rd 4th

5th

6th 7th

8th 9th 10th

Ω

0, P (Pause)

5.4

Edit a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select EDIT.

4. Press <OK> to display the current name.

5. Edit the name and press <OK>.

6. Edit the number and press <OK>.

7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5

Delete a Phonebook Entry

In idle:

1. Press <PHONEBOOK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select DELETE.

4. Press <OK> to confirm, and the entry will be deleted.

5.6

Delete

all Phonebook entries

1. Press <PHONEBOOK> to access the phonebook.

Press <MENU> and <UP/DOWN> to select DELETE ALL.

Press <OK> to display <CONFIRM?>.

Press <OK> to confirm. All entries will be deleted and the display will show

<EMPTY>.

5.7

Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and

how many phonebook entries are available for you to store in the phonebook.

1. Press <PHONEBOOK> to access the phonebook.

2. Press <MENU> and <UP/DOWN> to select PB STATUS.

3. Press <OK> to display how much of the phonebook is being used,

for example <14/ 0> means 14 entries are stored out of the

total

available spaces.