ALcom SYMPHONY 2200 Manual do utilizador
Procurar online ou descarregar pdf Manual do utilizador para Telefone sem fios ALcom SYMPHONY 2200. ALcom SYMPHONY 2200 2 páginas.
TECHNICAL DETAILS
Standard
Frequency
Operating range
USER GUIDE
Operating time
Symphony22 0 system
0
Temperature range
Electrical power
CLEANING AND CARE
Do not clean any part of your Symphony2200 system with benzene thinners
or other solvent chemicals as this may cause permanent damage which is not
covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your Symphony2200 system away from hot, humid conditions or
strong sunlight,and don't let it get wet.
Every effort has been made to ensure high standards of reliability for your
ymphony22 0 system
0
S
repair it yourself consult your supplier or the Helpline.
not try to
Digital Cordless Telephone
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
To use your handset and base together, you must be able to establish a radio link
3
GETTING TO KNOW YOUR PHONE
between them. The signal between the handset and the base is in accordance
with the normal standards for a DECT phone: Maximum range up to 300 metres
3.1
Handset Overview
outdoors or 50 metres indoors.
UP/CALL LIST
The signal range may decrease if there is any large metal object between the
In idle mode:
handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic
Press to access the call list
In menu mode:
doors or reinforced concrete. The signal strength may also be reduced by other
Press to scroll up the
solid structures like walls, or by other radio or electrical interference.
menu items
In Phonebook list /
2
INSTALLING YOUR PHONE
Redial list /
Call List:
2.1
Connecting the base station
Press to scroll up the list
During a call:
1) Plug the power supply
and line cord
into
Press to increase the
earpiece or speaker volume
the base station.
During ringing:
2) Always use the cables provided in the box
Press to increase the
ringer volume
Warning: Use only the provided adaptor, using
other power supplies may cause a hazard.
LEFT SOFT KEY(MENU/OK)
In idle mode:Press
Warning: Install the base unit in a position where the mains adapter plug
to access the main menu
will reach an easily accessible mains socket. Never try to lengthen the
In sub-menu mode:
mains power cable.
Press to confirm the selection
During a call: Press to access
Note: The base unit needs mains power for normal operation, not just for
Intercom/Phonebook/ Redial
charging the handset batteries.
List/ Call List
TALK ON
2.2
Installing and charging the batteries
In idle / predialing mode:
1) Place the 2 supplied batteries into the battery
Press to make a call
compartment
with the polarity markings as shown
.
In Redial list / Call List /
Phonebook
list
Use only the NiMH rechargeable battery type provided.
Press to make a call to the
2) Position the battery compartment cover over the batteries
display
ed entry in the list
During ringing:
and slide up to
click into place.
Press to answer a call
3) Put the handset on the base and charge for
15 hours before using the handset for the first time.
PHONEBOOK
The handset will give a beep when it
is properly placed on the base or charger.
In idle mode: Press to access
the phonebook list
If you have a Broadband line
Keypad lock
If you connect your telephone to a line with
Press and hold to lock/
a broadband connection, you will need to
unlock
keypad.
Press and hold to toggle between
insert a micro-filter between the telephone
the external and internal
and the telephone line, otherwise you may get
calls when both are set up.
interference between the telephone and the broadband,
which could cause problems.
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
5
4
USING YOUR PHONE
4.3
End a Call
During a call press <TALK OFF> to end the call.
4.1
Make a Call
OR
4.1.1
Preparatory Dialing
Put the handset on the base station or charger to end the call.
Enter the phone number and press <TALK ON> or <SPEAKERPHONE> to
4.4
Adjust Volume
connect to the line and
dial the number. When entering the number, if you
make a mistake, press <C>
to delete digits.
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
volume.
4.1.2
Direct Dialing
During a call:
Press <TALK ON> or <SPEAKERPHONE> to connect to the line and then
enter the phone number.
P
ress <UP/DOWN> to select volume 1-5. The current
When you end the call, the setting will remain at the last selected level.
(Note: if you enter a wrong digit you cannot correct it with the <C> key.)
4.5
Mute a Call
4.1.3
Call from the phonebook
You can talk to someone nearby without letting the caller hear you during a call.
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to
select the desired phonebook entry.
During a call:
Press <C> to mute the microphone and "MUTED" will display on the LCD.
Press <TALK ON>
or <SPEA ERPHONE>
K
to dial out the selected phonebook entry.
Your caller cannot hear you. Press <C> again to unmute the microphone.
Note: You can also access the phonebook by pressing <MENU/OK>, <DOWN>,
<MENU/OK>
4.6
Turn off
Note: The alphanumeric keys provide a short-cut to find entries beginning with
In idle, press and hold <HASH/#> to turn off the handset ringer. The "RINGER
the corresponding letters.
OFF"
icon is displayed on the LCD.
4.1.4
Call from the Call List (only available with Caller Display)
Note: The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Call List entry.
To turn the ringer back on, press and hold <HASH/#> again.
Press <TALK ON>
or <SP AKERPHONE>
E
to dial out the selected Call List entry.
4.7
Turn on the Keypad Lock
Note: You can also access the Call List by pressing <MENU/OK> twice.
In idle, press and hold <STAR/*> to turn on the keypad
4.1.5
Call from the redial list
LOCK"
icon is displayed on the LCD.
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
Note: You can still use <TALK ON> to answer a call
desired redial number.
when the
Press <TALK ON> or <SPEAKERPHONE> to dial out the selected redial number.
To turn the keypad lock off, press and hold <STAR/*> again.
4.1.6
Call timer
4.8
Redial the last number
Your handset automatically times the duration of every call.
You can redial any of the
The call timer is displayed as soon as you answer a call or 15
seconds after
the phonebook to go with the number, the name will be displayed instead.
dialling
and remains on the screen
,
for 5 seconds after
the end of the call.
The most recent last number will display at the top of the redial list.
It is shown in hours, minutes and seconds
format (HH:MM:SS).
4.8.1
Redial a Number from the Redial List
4.2
Answer a Call
1. In idle mode, press <DOWN> to access the redial list.
If the handset is not on the charging cradle:
Note: If the redial list entry shows a name, press <Hash/#> to view the number
When the phone rings, press <TALK ON>
or <SPEAKERPHONE>
to answer
of this entry.
a call.
2. Press <UP/DOWN> to browse the redial list.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or
3. Press <TALK ON> or <SPEAKERPHONE> to dial to the selected redial number.
charger will answer the call automatically, and no buttons need to be
Note: If there are no numbers in the redial list, the display shows " EMPTY " .
pressed.
11
Digital Enhanced Cordless
Telecommunication (DECT)
1 IMPORTANT SAFETY INSTRUCTIONS...........................................................
1.8GHz
2 INSTALLING YOUR PHONE ............................................................................ 5
Up to 300m outdoors;
2.1 C ONNECTING THE BASE STATION .......................................................................... 5
up to 50m indoors
2.2 I NSTALLING AND CHARGING THE BATTERIES ...................................................... 5
Standby: 100 hours
3 GETTING TO KNOW YOUR PHONE ................................................................ 6
Talking: 10 hours
Battery charge time:15 hours
3.1 H ANDSET O VERVIEW ................................................................................................ 6
3.2 B ASE S TATION O VERVIEW .....................................................................................
Operating 0 C to 40 C
3.
3
D ISPLAY I CONS AND S YMBOLS ............................................................................... 7
Storage -20 C to 60 C
3.
4
M ENU S TRUCTURE ....................................................................................................
3.
5
T EXT AND D IGIT E NTRY T ABLE ................................................................................ 9
2pcs x 1.2V 500mAH NiMH rechargeable
3.5.1
LATIN C
HARACTER S ET ......................................................................................... 9
AAA size battery cells
3.5.
2 P LISH CHARACTER SET......................................................................................
O
3.5.
3
NORWEGIAN CHARACTER SET............................................................................ 10
Base Unit/Charge Pod
3.5.
4 GREEK CHARACTER SET.....................................................................................
Input 6V DC, 300mA --
4 USING YOUR PHONE ......................................................................................1
4.1 M AKE A C ALL ............................................................................................................. 1
4.1.1 P REPARATORY D IALING .........................................................................................1
4.1.2 D IRECT D IALING .......................................................................................................1
4.1.3 C ALL FROM THE PHONEBOOK ...............................................................................1 1
4.1.4 C ALL FROM THE C ALL L IST
4.1.5 C ALL FROM THE REDIAL LIST
4.1.6 C ALL TIMER ..............................................................................................................1
4.2 A NSWER A C ALL ....................................................................................................... 1
4.3 E ND A C ALL ................................................................................................................ 1
4.4 A DJUST E ARPIECE V OLUME .................................................................................... 1
4.5 M UTE A C ALL ............................................................................................................. 1
4.6
TURN OFF HANDSET RINGER
However, if something does go wrong, please
.
do
4.7 T URN ON THE K EYPAD L OCK ................................................................................... 1
4.8 R EDIAL THE LAST NUMBER ..................................................................................... 1
4.8.1 R EDIAL A N UMBER FROM THE R EDIAL L IST .........................................................1
4.8.2 S TORE A R EDIAL N UMBER INTO THE P HONEBOOK ............................................1
4.8.3 D ELETE A R EDIAL N UMBER ....................................................................................1
4.8.4 D ELETE
ALL REDIAL LIST ENTRIES
4.9 F IND THE H ANDSET ................................................................................................... 1
4.10 M AKE AN I NTERNAL C ALL(FOR MULTI-HANDSET VERSIONS ONLY ) ................ . 1
4.10.1 I NTERCOM A NOTHER H ANDSET ..........................................................................1
4.10.2 C ALL A LL H ANDSETS .............................................................................................1
4.10.3 T RANSFER AN E XTERNAL C ALL TO ANOTHER HANDSET ................................1
4.10.4 M AKE A 3- WAY C ONFERENCE C ALL ....................................................................1
5 PRIVATE PHONEBOOK ...................................................................................1
5.1 A DD A N EW P HONEBOOK E NTRY ........................................................................... 1
5.2 S EARCH A P HONEBOOK E NTRY .............................................................................. 1
5.3 V IEW A P HONEBOOK E NTRY ................................................................................... 1
3.2
Base Station Overview
1
PAGE
Press the Page button on the base station to
page your handset(s).
SPEAKERPHONE
RIGHT SOFT KEY(CLEAR/BACK/
During a call:
It will ring for approximately 60 seconds.
MUTE/INTERCOM)
Press to turn on / off the
Press and hold to put base into registration mode.
In main menu mode: Press to go back to
speakerphone.
idle screen
Call List / Phonebook entry :
2
CHARGING CRADLE
In sub-menu mode: Press to go back to
Press to make a call with
previous level
speakerphone
CHARGE LED
3
During ringing:
In sub-menu mode: Press and hold to go
Press to answer a call
back to idle screen
Light on when the handset is being charged.
with speakerphone
In editing / predialing mode: Press to clear
4
Online LED
During answering machine message
a character / digit
playback / call screening:
In editing / predialing mode:
Light on when the
line is seized.
Press to play message via speaker
Press and hold to delete all the
3.3
Display Icons and Symbols
characters / digits
During a call: Press to mute/ unmute the
The LCD display gives you information on the current status of the telephone.
microphone
In idle mode:Press to intercom another
handset
TALK OFF
During a call: Press to end a call and go
back to idle screen
In menu / editing mode: Press to go back
to previous menu
Scroll up / down the menu items / Phonebook list / Redial list / Call List
In idle mode:
Steady when the handset is in range of the base. Flashes when out of
Press and hold to power off the handset
range of the base or not registered to the base.
In idle mode (when the handset is powered
off): Press and hold to power
on the handset.
Steady when an intercom call is in progress.
:
RECALL(also called FLASH)
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
When you get a busy line,
press R button
to get a new dial tone.
Indicate that handsfree is being used.
s
Press R button to answer call waiting line.
(second call) press R button again to
Indicates that the ringer is switched off.
get back to the first line.
Steady when an alarm is set. Flashes when the alarm is sounding.
DOWN/REDIAL
Indicates that the keypad is locked.
In idle mode:Press to access the redial list
Indicates when you have a new Voice Mail message.
In menu mode:
(This function needs the network support and not available
Press to scroll down the menu items
In Phonebook list / Redial list / Call List:
in Singapore.)
Press to scroll down the list
During a call:
Indicates when the battery is fully charged.
(
)
/
RINGER OFF
Press to decrease the earpiece
or speaker
Press and hold to turn the
Whole icon flashes when the battery performs charging.
volume
handset ringer off.
During ringing:
Internal block icon flashes when the battery is in final charging stage.
Press to decrease the ringer volume
6
4.8.2
Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select ADD TO PB.
3. Press <OK> and then enter the name you want to use in the phonebook.
4. Press <OK> and then modify the number, if necessary.
5. Press <OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
only be played if you subscribe to Caller Display and the incoming number
setting is shown.
matches the stored number.)
7. Press <OK> to confirm, and the entry will be stored.
4.8.3
Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE.
3. Press <OK> to confirm, and the entry will be deleted.
the
Handset Ringer
4.8.4
Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.8.1.
2. Press <MENU> and <UP/DOWN> to select DELETE ALL
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
4.9
Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
handset is ringing.
<TALK OFF> /<C> on any handset or <PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
10
last numbers called. If you have stored a name in
4.10 Make an Internal Call (For users purchased more than 1 set)
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls. If the called handset is not
answered within 60 seconds, the called handset will stop ringing and the calling
handset will return to standby mode.
Note: If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display
12
TABLE OF CONTENTS
5.4 E DIT A P HONEBOOK E NTRY .................................................................................... 1
5.5 D ELETE A P HONEBOOK E NTRY .............................................................................. 1
3
5.6 D ELETE
ALL PHONEBOOK ENTRIES.......................................................................1
5.7 C HECK THE P HONEBOOK U SAGE .......................................................................... 1
6 CALLER DISPLAY (NETWORK DEPENDENT)...............................................1
6.1 V IEW THE C ALL L IST ................................................................................................. 1
6.2 S TORE A C ALL L IST N UMBER INTO THE P HONEBOOK ........................................ 1
6.3 D ELETE AN ENTRY IN THE C ALL L IST .................................................................... 1
6.4 D ELETE
ALL CALL LIST ENTRIES
................
7 PHONE SETTINGS ...........................................................................................1
7.1 D ATE AND T IME S ETTINGS ...................................................................................... 1
7
7.1.1 C HANGE THE D ATE F ORMAT ................................................................................. 1
7.1.2 C HANGE THE T IME F ORMAT .................................................................................. 1
8
7.1.3 S ET THE T IME ........................................................................................................... 1
7.1.4 S ET THE D ATE .......................................................................................................... 1
7.2 A LARM S ETTINGS ......................................................................................................
10
7.2.1 T URN ON / OFF THE A LARM ..................................................................................... 19
7.2.2 S ET THE A LARM T IME ............................................................................................. 19
10
7.3 H ANDSET S ETTINGS .................................................................................................
7.3.1 S ET THE R INGER
MELODY
FOR I NTERNAL C ALLS ........................
1
7.3.2 S ET THE R INGER MELODY FOR E XTERNAL C ALLS ............................................
7.3.3 S ET THE R INGER V OLUME .....................................................................................
1
7.3.4 S ET A LERT T ONES ...................................................................................................
1
7.3.5 S ET THE H ANDSET L ANGUAGE .............................................................................
1
7.3.6 R ENAME THE H ANDSET ..........................................................................................
7.3.7 C HOOSE THE I NFORMATION TO BE D ISPLAYED IN I DLE ...................................
(ONLY AVAILABLE WITH CALLER DISPLAY)
...
...... 1 1
7.3.8 S ET THE A UTO A NSWER ........................................................................................
................................................................................ 1
1
7.4 B ASE S ETTINGS ........................................................................................................ 21
1
7.4.
1
D E - REGISTER A H ANDSET ..................................................................................... 21
1
7.4.
2
C HANGE THE DIAL MODE .......................................................................................
2
7.4.
3
C HANGE THE F LASH (RECALL) T IME .....................................................................
2
2
7.4.
4
C HANGE THE S YSTEM PIN C ODE ......................................................................... 22
7.5 R EGISTRATION .......................................................................................................... 23
................................................................................... 1
2
2
7.6 R ESET Y OUR P HONE ................................................................................................ 23
2
TROUBLESHOOTING ...................................................................................
2
8
3
DECLARATION OF CONFORMITY .............................................................
9
3
.....................................................................................
10
GUARANTEE AND SERVICE
........................................................................1
3
3
3
4
4
4
4
5
5
5
5
1
2
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
Indicates when there are more characters or numbers in front of those
being displayed.
2
Indicates when there are more characters or numbers in front of those
being displayed.
Indicates when there are more characters or numbers after those being
displayed.
Press the MENU/OK key to access the main menu.
4
3
1
Press the MENU/OK key to confirm the current selection.
Press the C/MUTE key to start an intercom call.
(INT)
Press the C/MUTE key to go back to the previous menu level or cancel
(BACK)
the current action.
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
the microphone during a call.
3.4
Menu Structure
In idle mode, press <MENU/OK>
to go to CALL LIST, the first option in the menu list.
Press <UP> or <DOWN> to go to other options in the menu list.
Press <OK> to enter a sub-menu or function.
Press <Back> to go back to the previous level.
Refer to the following for the menu structure.
<UP/DOWN>
<UP/
<UP/
Key Press
<MENU>
DOWN>
DOWN>
Main
CALL LIST PHONEBOOK BS
HS
Menu
SETTINGS
SETTINGS
Sub
ALARM
Shows EMPTY
Shows EMPTY
DELETE HS
menu
or the first Call
or the first
DIAL MODE
RING SETUP
TONE SETUP
List Entry. Then
phonebook Entry.
FLASH TIME
Then <OK> for:
CHANGE PIN
LANGUAGE
<OK> for:
ADD TO PB
ADD
RENAME HS
DELETE
PB STATUS
HS DISPLAY
DELETE ALL
or
AUTO ANSWER
DATE & TIME
DETAILS
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
7
8
4.10.1 Intercom Another Handset
1. In idle mode, press <C/MUTE/INT> and all the other registered handset
numbers will display, along with a "9".
2. Enter the number of the handset that you want to call, or enter "9" to call all
handsets.
3. The called handset rings and <TALK ON> must be
pressed on that handset
to establish the intercom call.
Note: If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.
Note: If there is an external call while you are on an intercom call, you'll
hear warning beeps, and you have to end the intercom all, before you can
answer the external call.
4.10.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2. Press <KEY 9> to ring to all registered handsets
4.10.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU> and <UP/DOWN> to select INTERCOM.
2. Press <OK> to show all the other registered handset numbers, plus "9".
Enter the number for the handset you want to transfer the call to.
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish
an internal call.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
Note: If the other handset has not answered the intercom call, you can stop
the intercom and return to the external call by pressing <TALK OFF>
4.10.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.10.3.
"NOT POSSIBLE"
2. Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the external call.
13
14
1
IMPORTANT SAFETY INSTRUCTIONS
6
When using your telephone equipment, basic safety precautions should always
6
be followed to reduce the risk of fire, electric shock and injury, including the
6
6
following:
1) Read and understand all the instructions.
7
2) Follow all warnings and instructions marked on the product.
7
7
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
7
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
....................................................... 1
7
8
4)
Keep your S
ymphony2200
away from hot, humid conditions or strong sunlight,
and don't let it get wet or u
se this product
near water (for example, near
8
a bath tub, kitchen
sink, swimming pool).
8
5) Do not overload wall outlets and extension cords as this can result in the risk
8
8
of fire or electric shock.
8
6) Unplug this product from the wall outlet and refer servicing to our Repair
19
Centre under the following conditions:
• When the power supply cord or plug is damaged or frayed.
19
19
• If the product does not operate normally by following the operating instructions.
....
.................
20
• If the product has been dropped and the cabinet has been damaged.
20
• If the product exhibits a distinct change in performance.
20
20
7) NEVER use your S
ymphony22 0
0
outdoors during a thunderstorm-unplug the
21
base from the telephone line and the mains socket when there are storms
21
in your area. Damage caused by l ightning is not covered by the guarantee.
21
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
22
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
22
periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
.............................................................
24
or surroundings. The manufacturer will not be held liable for damage arising
.............................................................
from such non-compliance.
25
26
11) Do not use third party charging bays. Damage may be caused to the batteries.
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
them where they could get punctured.
3
3.5
Text and Digit Entry Table
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
3.5.1
Latin Cha racter Set
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Key Press 1st
2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1
space
-
1
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
9
W
X
Y
Z
9
0
0
*
?
/
\
(
)
*
,
<UP/
<UP/
<UP/
#
0
,
-
,
&
DOWN>
DOWN>
DOWN>
REGISTRATION DEFAULT
PIN? - - - -
PIN? - - - -
9
5
PRIVATE PHONEBOOK
Each handset can store
up to 0 private phonebook entries with names and
5
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
you subscribe to Caller Display and the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
5.1
Add a New Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
c
OR
Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press
<OK> to access the phonebook.
2. Press <MENU> to show ADD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
phonebook entry.
6. Press <OK> to store the phonebook entry.
5.2
Search a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Enter the first letter of the name using the alphanumeric keys(e.g. if it
begins with C, press the 2 key three times),
and then <UP/DOWN> to scroll to the entry you
want.
5.3
View a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select VIEW.
4. Press <OK> and <UP/DOWN> to review the name, number and ringtone
of the selected phonebook entry.
Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
15
Package contents
The package contains the following items:
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 AAA rechargeable batteries
• 1 User manual
Note: If you have a Twin, Triple or Quad system, you will also have the requisite
extra handset(s) and batter
ies
, and a charger pod for each extra handset.
4
3.5.
2 Polish Character Set
Alphanumeric Editing
Number Editing (For phone
Key
(For phonebook name editing and renaming handset)
editing, date/time editing)
Key Press 1st
2
nd
3rd 4th
5th
6th 7th
8th 9th 10th
1
SP
-
1
1
2
A
B
C
2
2
3
D
E
F
3
3
4
G
H
I
4
4
5
J
K
L
Ł
5
5
6
M
N
O
6
6
7
P
Q
R
S
7
7
8
T
U
V
8
8
9
W
X
Y
Z
9
9
0
0
0, P (Pause)
*
*
#
#
3.5.3 Norwegian Character Set
Number Editing (For phone
Alphanumeric Editing
Number Editing (For phone
Key
number editing,date/time editing)
(For phonebook name editing and renaming handset)
editing, date/time editing)
Key Press 1st
2
nd
3rd 4th
5th
6th 7th
8th 9th 10th
1
SP
-
1
1
1
2
2
A
Æ
B
C
2
2
3
3
D
E
F
3
3
4
4
G
H
I
4
4
5
5
J
K
L
5
5
6
M
N
O
6
6
6
7
7
P
Q
R
S
7
7
8
T
U
V
8
8
8
9
9
W
X
Y
Z
9
9
0
0
0
0, P (Pause)
0, or P (Pause) if press and hold
*
*
*
#
#
#
3.5.4 Greek Character Set
Alphanumeric Editing
Number Editing (For phone
(For phonebook name editing and renaming handset)
editing, date/time editing)
nd
Key Press 1st
2
3rd 4th
5th
6th 7th
8th 9th 10th
1
SP
-
1
1
2
A
B
Γ
2
2
3
Δ
E
Ζ
3
3
4
H
Θ
I
4
4
Λ
Μ
5
K
5
5
6
Ν
Ξ
Ο
6
6
7
Π
Ρ
Σ
7
7
8
Τ
Υ
Φ
8
8
9
Χ
Ψ
Ω
9
9
0
0
0, P (Pause)
*
*
#
#
10
5.4
Edit a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select EDIT.
4. Press <OK> to display the current name.
5. Edit the name and press <OK>.
6. Edit the number and press <OK>.
7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.
5.5
Delete a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select DELETE.
4. Press <OK> to confirm, and the entry will be deleted.
5.6
Delete
all Phonebook entries
1. Press <PHONEBOOK> to access the phonebook.
.
2.
Press <MENU> and <UP/DOWN> to select DELETE ALL.
Press <OK> to display <CONFIRM?>.
3.
4.
Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
5.7
Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset and
how many phonebook entries are available for you to store in the phonebook.
1. Press <PHONEBOOK> to access the phonebook.
2. Press <MENU> and <UP/DOWN> to select PB STATUS.
3. Press <OK> to display how much of the phonebook is being used,
for example <14/ 0> means 14 entries are stored out of the
5
total
5
0
available spaces.
16