Alcoscan AL4000 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova Alcoscan AL4000. Alcoscan AL4000 6. Coin operated breathalyzer

accuracy is achieved 30 minutes after drinking.
2. When you exhale through the straw, some unintentional salivation may affect the
built-in equipment. However, please be aware that placing any other liquids or
materials into the straw may cause the sensor to malfunction.
3. Cigarette smoking may also increase the blood alcohol concentration value. Allow one
minute after smoking before testing.
Specifications
Indication of B.A.C
Warm up time
Response time
Sensor
Accuracy
Ambient conditions
Display
Result reading
Power supply
Mouth piece
Coin Mechanism
Weight
Dimensions(mm)
Setting Guide for Buzzer, Low/High Level
Open the machine and you will see three buttons on the top of the electric circuit board.
Press two buttons labeled "SW1" and "SW2" at the same time, hold them down for at least
four seconds and then release them. You can see this message, "To enter the set up
mode"
This changes the status into the set up mode. To go back to the previous mode, repeat the
above procedure. The set up mode allows you to work the machine's maintenance.
It is possible to change functions only by pressing "SW1".
0.000 to 5.000 ‰ or
0.000 to 2.500 mg/ℓ or
0.000 to 0.500 %BAC
within 30 seconds
within 6 seconds at 0.10 %BAC
Fuel Cell Sensor
±0.005 %BAC at 0.100 %BAC
Operation : 0 to 40
Storage
: 0 to 50
LCD Module
Good: Less than 0.02%BAC(0.00~0.20
0.00~0.10mg/l)
Warning: 0.02~0.05%BAC(0.20~0.50
Danger: More than 0.05% BAC(0.50
AC 110~220, 50/60 HZ, 0.5A input
DC 12V, 1.5A output
Cylindrical straw
Specify denomination of single coin
5.85Kg (including DC power supply)
90*412*258 (W*H*D)
or 0.25mg/l)
or
or 0.10~0.20mg/l)