Alcoscan AL4000 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova Alcoscan AL4000. Alcoscan AL4000 6. Coin operated breathalyzer

If you select the function, please press "SW2".

1. Buzzer

You can turn the buzzer sound on or off by using 'On' or 'Off'.

2. Low Pass Level

The default number can be set from 0.000 to 0.040%BAC.

3. Hi Danger Level

Being above the level entails you are over the legal limit permitted, and that you

must not drive.

The default number can be set from 0.050 to 0.100%BAC.

Go to "To enter the set up mode" again if you finish setting the function and then select

EXIT.

Maintenance

The software product is easy to maintain, and its operating environment can be changed

without any special skills. It automatically checks and adjusts the accuracy rate of

measurement.

SW1. Total Count

SW2. Set the coin number

SW3. Test

1. If you want to check the total amount of tests, press SW1 and the display window will

show the test.

Press SW1 during 2 seconds and the count will be reset to 0, automatically returning

to normal operation mode.

Wait a few seconds after testing.

2. When you adjust the number of coins for each test, press SW2 during 2 seconds.

The display window will show "set the coin number", then press SW2 again. It will

allow from 0 to 10 coins per test.

If number 2 is entered, that means two coins are required. The default number was

set to 1.

Replacing sensors