Xerox Synergix 8825 Manuale del software - Pagina 17

Sfoglia online o scarica il pdf Manuale del software per Software Xerox Synergix 8825. Xerox Synergix 8825 30. Windows nt 4.0 postscript print driver user guide
Anche per Xerox Synergix 8825: Manuale dell'operatore (48 pagine), Manuale di configurazione (20 pagine), Nota di rilascio (23 pagine), Manuale supplementare (26 pagine)

Document Properties Dialog (Advanced Tab Parameters)

Copy Count

This parameter displays the currently-selected number of copies to print.

To change the Copy Count, left mouse click on Copy Count and enter a

selection from 1 to 999 in the entry box supplied in the bottom dialog box.

Note that although the driver supports 9999 copies, the printer is

restricted to a maximum count of 999. The default copy count is 1.

Collate Copies

When you select Copy Count and make an entry of more than 1, the

Collate Copies check box is enabled at the bottom of the dialog. If

you would like to have copies printed out in 1-2-3, 1-2-3 order

(depending upon your application), use your left mouse button to

place a check mark in the Collate Copies box. The default for

collation is off.

GRAPHIC PARAMETERS

Color Appearance

As the printer is a Monochrome device, the setting for Color Appearance

is not important. If Monochrome is not the default, you may click on

Color Appearance and select the Monochrome radio button at the bottom

of the dialog.

Scaling

This parameter displays the currently-selected Scaling of the printed

image. To change the scaling, left mouse click on Scaling and enter a

selection from 10 - 999%, which is the scaling range supported by the

printer. The default setting is 100%.

Note: If you are performing a large scale enlargement, be sure to

manually select the appropriate Paper Size so that your image will fit onto

one of the available rolls of media installed in the printer.

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide

TrueType Font

This parameter displays the currently-selected option for printing with

TrueType Fonts. To change the selection, left mouse click on TrueType

Font and click on the appropriate radio button. If you would like to print

with the TrueType fonts exactly as shown on your screen, select

Download as Soft font. If you prefer substituting printer-resident

PostScript fonts for your TrueType fonts, speeding up the printing

process, select Substitute with Device Font. The default is Substitute

with Device Font.

Tip: To quickly view your system-installed fonts and the printer-resident

fonts currently selected for substitution, go to "Start," "Settings",

"Printers," right mouse click on your PostScript printer icon, select

"Properties," and click on the Device Settings Tab. Double click on Font

Substitution Table. To see a display of printer-resident fonts available for

substitution, click on any font and a list will be displayed at the bottom of

the dialog.