- ページ 17

ソフトウェア Xerox Synergix 8825のPDF ソフトウェアマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Synergix 8825 30 ページ。 Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8825 にも: 取扱説明書 (48 ページ), セットアップマニュアル (20 ページ), リリースノート (23 ページ), 補足マニュアル (26 ページ)

Xerox Synergix 8825 ソフトウェアマニュアル
Document Properties Dialog (Advanced Tab Parameters)
Copy Count
This parameter displays the currently-selected number of copies to print.
To change the Copy Count, left mouse click on Copy Count and enter a
selection from 1 to 999 in the entry box supplied in the bottom dialog box.
Note that although the driver supports 9999 copies, the printer is
restricted to a maximum count of 999. The default copy count is 1.
Collate Copies
When you select Copy Count and make an entry of more than 1, the
Collate Copies check box is enabled at the bottom of the dialog. If
you would like to have copies printed out in 1-2-3, 1-2-3 order
(depending upon your application), use your left mouse button to
place a check mark in the Collate Copies box. The default for
collation is off.

GRAPHIC PARAMETERS

Color Appearance
As the printer is a Monochrome device, the setting for Color Appearance
is not important. If Monochrome is not the default, you may click on
Color Appearance and select the Monochrome radio button at the bottom
of the dialog.
Scaling
This parameter displays the currently-selected Scaling of the printed
image. To change the scaling, left mouse click on Scaling and enter a
selection from 10 - 999%, which is the scaling range supported by the
printer. The default setting is 100%.
Note: If you are performing a large scale enlargement, be sure to
manually select the appropriate Paper Size so that your image will fit onto
one of the available rolls of media installed in the printer.
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide
TrueType Font
This parameter displays the currently-selected option for printing with
TrueType Fonts. To change the selection, left mouse click on TrueType
Font and click on the appropriate radio button. If you would like to print
with the TrueType fonts exactly as shown on your screen, select
Download as Soft font. If you prefer substituting printer-resident
PostScript fonts for your TrueType fonts, speeding up the printing
process, select Substitute with Device Font. The default is Substitute
with Device Font.
Tip: To quickly view your system-installed fonts and the printer-resident
fonts currently selected for substitution, go to "Start," "Settings",
"Printers," right mouse click on your PostScript printer icon, select
"Properties," and click on the Device Settings Tab. Double click on Font
Substitution Table. To see a display of printer-resident fonts available for
substitution, click on any font and a list will be displayed at the bottom of
the dialog.
13