Yamaha Clavinova CLP-156 Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Strumento musicale Yamaha Clavinova CLP-156. Yamaha Clavinova CLP-156 45. Yamaha clp-156: owners manual

Stampa la pagina

Utility Functions

Select the Load Individual

Key Tuning Function

tun

MIDI/

TRANSPOSE

Execute the Load Individual

Key Tuning Function

Lod

MIDI/

TRANSPOSE

The Clavinova uses only 3.5" 2DD floppy disks. We recommend that you use Yamaha 2DD disks. Before you can use a

new disk for recording, the disk must be "formatted" so that the Clavinova can recognize it and correctly write the music data

onto it.

Insert the Disk To Be

Formatted

For

Engage the Format Function

n Y

TEMPO

Hold the [MIDI/TRANSPOSE] button and press the SONG [r] or

[f] button as many times as necessary until "tun" and "Lod" flash alter-

nately on the display — don't release the [MIDI/TRANSPOSE] button yet.

Lod

SONG

While still holding the [MIDI/TRANSPOSE] button, press the [PLAY]

button to actually begin loading the data. Simply release the [MIDI/

TRANSPOSE] button before pressing the [PLAY] button if you want to

cancel the function. "Lod" will appear on the display while the data is being

End

loaded, then "End" will appear briefly when the load operation has been

completed.

PLAY

REC

Utility 4: Floppy Disk Format

Insert a new blank disk. Make sure that the disk's write protect tab is set

to the "write" position (tab closed), and insert the new disk into the disk

drive unit with the sliding door facing the drive slot and the label side of the

disk facing upward. The disk should click securely into place, and the disk

drive lamp should light briefly.

Press the TEMPO [ ] or [ ] button. "n y" will flash on the display.

• The Individual Key Tuning mode will automatically be turned ON when

NOTE

the data has been loaded.

• If no individual key tuning data exists in the selected song number, "no"

will appear on the display. If this occurs, try again from step 2, above.

• "For" will flash on the display to indicate that a blank (unformatted) disk

NOTE

or one with a format not recognizable by the CLP-156 is loaded in the

drive. In this case you can go directly to the next step. If an already-

formatted disk that you want to re-format is loaded (i.e. to completely

erase all data from the disk in one operation), you'll have to select the

format function by pressing the SONG [ r ] or [ f ] button as many times

as necessary until "For" appears on the display while holding the [MIDI

TRANSPOSE] button, then release the [MIDI/TRANSPOSE] button

when "n y" appears flashing on the display and proceed to step 3.

• "Pro" will appear on the display if a protected disk that cannot be format-

ted is loaded in the drive: a write-protected disk or a Disklavier PianoSoft

disk.