Yamaha Clavinova CLP-156 Руководство пользователя - Страница 24
Просмотреть онлайн или скачать pdf Руководство пользователя для Музыкальный инструмент Yamaha Clavinova CLP-156. Yamaha Clavinova CLP-156 45 страниц. Yamaha clp-156: owners manual
Печатать страницу
Utility Functions
C
Select the Load Individual
Key Tuning Function
tun
MIDI/
TRANSPOSE
V
Execute the Load Individual
Key Tuning Function
Lod
MIDI/
TRANSPOSE
The Clavinova uses only 3.5" 2DD floppy disks. We recommend that you use Yamaha 2DD disks. Before you can use a
new disk for recording, the disk must be "formatted" so that the Clavinova can recognize it and correctly write the music data
onto it.
Z
Insert the Disk To Be
Formatted
For
X
Engage the Format Function
n Y
TEMPO
24
Hold the [MIDI/TRANSPOSE] button and press the SONG [r] or
[f] button as many times as necessary until "tun" and "Lod" flash alter-
nately on the display — don't release the [MIDI/TRANSPOSE] button yet.
Lod
SONG
r
f
While still holding the [MIDI/TRANSPOSE] button, press the [PLAY]
button to actually begin loading the data. Simply release the [MIDI/
TRANSPOSE] button before pressing the [PLAY] button if you want to
cancel the function. "Lod" will appear on the display while the data is being
End
loaded, then "End" will appear briefly when the load operation has been
completed.
PLAY
REC
Utility 4: Floppy Disk Format
Insert a new blank disk. Make sure that the disk's write protect tab is set
to the "write" position (tab closed), and insert the new disk into the disk
drive unit with the sliding door facing the drive slot and the label side of the
disk facing upward. The disk should click securely into place, and the disk
drive lamp should light briefly.
Press the TEMPO [ ] or [ ] button. "n y" will flash on the display.
• The Individual Key Tuning mode will automatically be turned ON when
NOTE
the data has been loaded.
• If no individual key tuning data exists in the selected song number, "no"
will appear on the display. If this occurs, try again from step 2, above.
• "For" will flash on the display to indicate that a blank (unformatted) disk
NOTE
or one with a format not recognizable by the CLP-156 is loaded in the
drive. In this case you can go directly to the next step. If an already-
formatted disk that you want to re-format is loaded (i.e. to completely
erase all data from the disk in one operation), you'll have to select the
format function by pressing the SONG [ r ] or [ f ] button as many times
as necessary until "For" appears on the display while holding the [MIDI
TRANSPOSE] button, then release the [MIDI/TRANSPOSE] button
when "n y" appears flashing on the display and proceed to step 3.
• "Pro" will appear on the display if a protected disk that cannot be format-
ted is loaded in the drive: a write-protected disk or a Disklavier PianoSoft
disk.