Yamaha Disklavier Mark III series DGC1B Manuale di funzionamento avanzato - Pagina 38
Sfoglia online o scarica il pdf Manuale di funzionamento avanzato per Strumento musicale Yamaha Disklavier Mark III series DGC1B. Yamaha Disklavier Mark III series DGC1B 39. Dgc1b
Stampa la pagina
6
Use [<] and [>] to select an
option.
7
Use the [–/NO] and [+/YES]
buttons to set the option.
8
To start recording, press
[PLAY/PAUSE].
Recording will start immediately, so be sure
that you are ready to play the part.
9
When you finish playing, press
[STOP].
The following display appears.
The following table gives a description of
each of the options.
Option
Description
SAVE
The re-recorded part is saved
with the other existing part
under the current song number.
NEW
The re-recorded part is saved
under a new song number. The
existing parts are kept under
the current song number.
CANCEL
The re-recorded part is
discarded. The existing parts
are kept under the current song
number.
10
Use [<] and [>] to select an
option, then press [ENTER].
The re-recording is saved as indicated or
canceled.
34
Recording a Pedal
Count-In
When recording a song, you can also record a
"count-in" preceding the song to indicate the
tempo and the initial downbeat of the song, as a
band leader would do. This is useful when, for
example, you want to play a four-hand duet by
yourself or enjoy ensemble playing using other
instruments along with a song being played back
on the Disklavier.
Count-in beats are recorded using the sustain
pedal. Each press of the sustain pedal is recorded
as a count-in beat. Later when you play back the
recorded song, the metronome beeps and the LED
volume indicators flash the number of times you
pressed the sustain pedal to indicate the count-in
beats.
1
Specify a disk.
2
Select the part that you want to
record — usually left or right —
then press [REC] to engage the
Record Standby mode.
3
Press [PLAY/PAUSE].
The Disklavier is now ready for you to start
playing.
4
Count yourself in by pressing the
sustain pedal, then start playing
the keyboard.
A pedal count-in can be any number of
beats. Press the sustain pedal as many times
as necessary; each press will be recorded as
a count-in beat.