Yamaha Disklavier Mark III series DGC1B Gelişmiş Kullanım Kılavuzu - Sayfa 38
Müzik Enstrümanı Yamaha Disklavier Mark III series DGC1B için çevrimiçi göz atın veya pdf Gelişmiş Kullanım Kılavuzu indirin. Yamaha Disklavier Mark III series DGC1B 39 sayfaları. Dgc1b
Sayfayı Yazdır
6
Use [<] and [>] to select an
option.
7
Use the [–/NO] and [+/YES]
buttons to set the option.
8
To start recording, press
[PLAY/PAUSE].
Recording will start immediately, so be sure
that you are ready to play the part.
9
When you finish playing, press
[STOP].
The following display appears.
The following table gives a description of
each of the options.
Option
Description
SAVE
The re-recorded part is saved
with the other existing part
under the current song number.
NEW
The re-recorded part is saved
under a new song number. The
existing parts are kept under
the current song number.
CANCEL
The re-recorded part is
discarded. The existing parts
are kept under the current song
number.
10
Use [<] and [>] to select an
option, then press [ENTER].
The re-recording is saved as indicated or
canceled.
34
Recording a Pedal
Count-In
When recording a song, you can also record a
"count-in" preceding the song to indicate the
tempo and the initial downbeat of the song, as a
band leader would do. This is useful when, for
example, you want to play a four-hand duet by
yourself or enjoy ensemble playing using other
instruments along with a song being played back
on the Disklavier.
Count-in beats are recorded using the sustain
pedal. Each press of the sustain pedal is recorded
as a count-in beat. Later when you play back the
recorded song, the metronome beeps and the LED
volume indicators flash the number of times you
pressed the sustain pedal to indicate the count-in
beats.
1
Specify a disk.
2
Select the part that you want to
record — usually left or right —
then press [REC] to engage the
Record Standby mode.
3
Press [PLAY/PAUSE].
The Disklavier is now ready for you to start
playing.
4
Count yourself in by pressing the
sustain pedal, then start playing
the keyboard.
A pedal count-in can be any number of
beats. Press the sustain pedal as many times
as necessary; each press will be recorded as
a count-in beat.