Yamaha YPT-370 Manuale di servizio - Pagina 15

Sfoglia online o scarica il pdf Manuale di servizio per Strumento musicale Yamaha YPT-370. Yamaha YPT-370 44.

8.
Removing the Spring Terminals
Spring terminal A and spring terminal B (Time required: About 8 minutes)
l
1. Remove the lower case assembly. (See procedure 1)
2. Remove the BATT ribbon cable soldered to spring terminals A and B. (Fig.9)
3. Flip over the lower case assembly, and remove the battery cover assembly. (Fig.1)
4. Spring terminal A is removed by slowly lifting upward and then sliding to the top right. (Fig.9)
5. To remove spring terminal B, release the hook, and pull it out from the inside. (Fig.9)
Spring terminal C and spring terminal D (Time required: About 1 minute each)
l
1. Remove the battery cover assembly. (See "●Spring terminal A and spring terminal B" in procedure 8)
2. Release the hooks, and pull out spring terminals C and D. (Fig.9)
SPRING TERMINAL B
接点バネB
CONNECTER
半田付け
SOLDERING
ASSEMBLY
BATT束線
BATT
接点バネD
SPRING TERMINAL D
フック
HOOK
HOOK
フック
接点バネA
SPRING TERMINAL A
Fig.9
PSR-E373/YPT-370
接点バネD
SPRING TERMINAL D
接点バネC
SPRING
TERMINAL C
15