DirectConnect Cat5/6 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Estensore DirectConnect Cat5/6. DirectConnect Cat5/6 4. High speed hdmi cat5/6 dual extender

Stampa la pagina

2.0 F

EATURES

This high-performance DirectConnect

dual

CAT5e or CAT6 with cross stand inside UTP cable has many benefits and

(2)

features that enable it to perform in a superior manner. Among those benefits and

features you will find:

2 sets of HDMI™ inputs at transmitter, application could be 2 HDMI™ inputs



and 2 HDMI™ outputs when using additional



HDMI™ cable length is fixed and unchangeable after it is produced.

connectors can only be soldered or terminated by the professional

manufactures that produce them, the installer and/or users cannot modify by

themselves. However Cat5 or Cat6 UTP cables are available everywhere and

be processed easily.



HDMI™ cables are not easy to bend and the connectors are large to pull

through conduit and the wall. However, Cat5/6 cable has no such problems.



Uses Cat5 or Cat6 UTP cable to substitute for HDMI™ cable to achieve

long distance transmission without signal loss.



Equalization boost via DIP switch on back side of each receiver to adjust

variables to compensate for the length of the link cable (< 25 meters or > 25meters)

HDMI™ 1.3 and HDCP 1.1 compliant up to full 1080P and supports DDC & EDID



Dual

Cat5 or Cat6 UTP cables can substitute a HDMI™ cable to achieve long



(2)

distance transmission of 148 feet



Supports DVI equipment with the use of a HDMI™ to DVI adapter. It provides an

easy and flexible cabling solution for integrating home theater components.

3.0 P

ACKAGE

ONTENTS

Before attempting to use this DirectConnect® unit, please check the packaging and

make sure the following items are contained in the shipping carton:

DirectConnect

HDMI™ Extender One



Two (2) 5 Volt DC Power Adapters



User's Manual

Note: Please retain the original packing material in case you need to return the unit. If you

find any items missing, contact DirectConnect

the model number, serial number, and invoice available for reference when you call.

4.0 C

ONNECTION AND

PERATION

1) Connect the HDMI™ signal source to the transmitter unit input port

* Please refer to connection diagram section

2 & 3) Connect dual Cat5 or dual Cat6 UTP cable between the transmitter and receiver

units. Please use EIA/TIA-568 termination

4) Connect the HDMI™ display device to the receiver unit output port

5) Insert the DC side of the 5v power supply into the transmitter and receiver before connecting to

the wall outlet. Then connect the AC side of the power supply into the wall outlet after all

connections have been made.

(Ideally the AC power should be surge suppressed and filtered)

Insert/Remove cables gently & avoid twisting/kinking your HDMI™ cables.

Attention:

High Speed HDMI™ CAT5/6 Extender via

receiver SKU# .15698

(optional)

or 164 feet

@ 1080P.

(Cat5)

(Cat6)

Transmitter and one

Receiver

(1)

immediately (800.531.3224). Please have

(HDMI™ IN)

(Pa ge 5)

(T568B)

(HDMI™ OUT)

4 / 8

4.1 P

ANEL

ESCRIPTIONS

HDMI™ Extender Transmitter

HDMI™

1 - HDMI™ Input

2 - Cat5 Output – Video

3 - Cat5 Output – Data

HDMI™ Extender Receiver

4 - HDMI™ Output 2 - Cat5 Output – Video 5 - DC Input Power

3 - Cat5 Output - Data

Please use EIA/TIA-568 termination (T568B) and do not apply DC power to unit until all connections are made.

4.2 C

ONNECTION

Note: In order to achieve the highest transmission quality, please choose unshielded Cat5e or Cat6 and terminate with metal

RJ-45 connectors

Higher-resolutions and longer transmission distances require low skew cables for the best performance.

1. The cables with lower quality will not achieve the perfect transmission effect and long distance.

2. Theoretically the function of this product is normal when adopting short distance transmission.

If this product cannot transmit long distance, there may be quality problems in the transmission cables.

- DIP SWITCH SETTING: (back side)

================================

１ (Input Equalization Boost Setting)

↑ ON (Cable Length > 25M)

↓ OFF (Cable Length < 25M)

Recommended 「 ON↑」

--------------------------------------------------------

IAGRAM

OPTIONAL RECEIVER

5 / 8

5 - DC Input Power