DirectConnect Cat5/6 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Estensore DirectConnect Cat5/6. DirectConnect Cat5/6 4. High speed hdmi cat5/6 dual extender

Stampa la pagina

5.0 T

ROUBLESHOOTING

If this DirectConnect

product does not appear to be functioning, please make certain that the

source and the destination device connected to the unit are functioning correctly. If other

problems exist please check the conditions below carefully.

In the event of problems, first make certain that the dual Cat5/6 cables are not longer than

specifications. Next, make certain that the HDMI™ Extenders are receiving power.

If all is well in these areas, remember that HDMI™ devices communicate with one another so the

source devices and destination device must be fully HDMI™ capable. If you experience problems

using the HDMI™ Extender, you should attempt to determine what is wrong by attaching each of

the source devices – one at a time – directly to the destination device using the same cables you

are using with the expanded system. This is a way of determining if the problem is due to bad

cables or a problem with the other devices. If you are unable to obtain a signal using this

simplified path, suspect the cables, the source device(s) and/or the destination device.

[OFF]

No Power

Power / Status LED:

[Red]

No Video Clock Signal Detect

CONDITION

No display image/LED light

Is the power adapter connected? If a power strip is used, set to "ON"?

Is the display unit turned on? Is the display unit set to the correct video

input? Are your HDMI™ and/ or Cat5e/6 cables damaged? Are the cables

connected properly? Please refer to the connection diagram.

[Blue] Check Video Link Cable Length & Quality.

No display image/LED light ON

Check Video & Data Cable Connect.

Transmitter & Receiver are ON

Check DIP Switch Setting.

Check Power Adapter

[Red] Check Video & Data Cable Connect.

[Purple] Check DATA Link Cable Connect,

White noise

Check Video Link Cable Connection, Length, and Quality

Color noise

Check Video Link Cable Connection, Length, and Quality

Picture with noise:

Picture disappear

(signal too weak or with interference)

Check Video Link Cable Connection, Length, and Quality

Cabling away from EMI interference source

1- Check the display unit's volume

Image without sound

2- Turn off the HDMI™ source (DVD, PS3 etc.) and power on again.

If there is still no sound, then:

3- Unplug the power adapter on the Extender transmitter and receiver unit

Note

: That units connected with a DVI adapter

for 10 seconds and then plug in again.

will not have sound – DVI is a video-only

4- Repeat step 2 again if still not working.

connection standard

Note:

Examine the HDMI™ and/or Cat 5e/6 cable and replace with new cables if

possible. To ensure that the extender units are operating correctly, test

Poor picture quality

with the shortest HDMI™ and/or Cat 5e/6 cable possible. Longer or

(snow, sparkles, banding, etc)

inferior/ damaged cables will compromise image quality. Use only

Cat5e/6 UTP cable with cross stand inside for the best results possible.

Notice:

DirectConnect

reserves the right to make changes in the hardware, packaging and/or any

accompanying documentation without prior written notice.

[Blue]

Detect Video Clock Signal

[Purple]

No DATA Link Detect

POSSIBLE SOLUTIONS

Check HDMI™ Cable Connect.

Check HDCP Compatibility.

Check HDMI™ Cable Connect.

Check DIP Switch Setting

(signal is too weak)

Check DIP Switch Setting

(signal too weak or too strong)

Check DIP Switch Setting

Some devices not HDMI™ certified may have compatibility problems.

6 / 8

1.0 SPECIFICATIONS

Signal Inputs/Output

Input Video Signal

Input DDC Signal

Maximum Single Link Cable Range

Maximum Single HDMI™ Cable Range

HDMI™ Connector

Link Connector

Output Video

Video format supported

DTV/HDTV

Digital Signal I/O

HDMI™ Compliance

Operating Frequency

Vertical Frequency Range

Resolutions

(HDTV)

Interlaced

(50&60Hz)

Progressive

(50&60Hz)

Mechanical

Size

Transmitter

(H-W-D)

Size

Receiver

(H-W-D)

Weight

Transmitter

(Net)

Weight

Receiver

(Net)

Warranty

Limited Warranty

Environmental

Operating Temperature

Operating Humidity

Power Requirement

5 Volt DC Power Adapter

Accessories

(2) 5 Volt DC Power Adapter

UL,CE, & FCC

User Manual

Note: Specifications are subject to change without notice

1.1 N

-HDCP-C

OMPLIANT

If a DVI device does not appear to work, make certain that the device is HDCP -compliant. A

non-HDCP-compliant DVI device will not work with a signal that has HDCP encoding present .

DO NOT open the HDMI™ extender boxes. There are no user repairable parts inside.

Once opened, DirectConnect

is not responsible. For other problems, please contact

DirectConnect

at 800.531.3224.

0.5-1.0 volts p-p

5 volts p-p (TTL)

Cat6 @ 164 feet

& Cat5e @ 148 feet

(50m)

28AWG HDMI™ Cable @ 20 feet

(6m)

HDMI™A Type x 2

& A Type x 1

(Input)

RJ-45 shielded x 4

x 2

(Transmitter) &

HDMI™1.3 / HDCP 1.1

480i/480p//720p/1080i/1080p

HDM™1.3 and HDCP 1.1 compliant

60Hz

480i & 1080i

480p,720p, & 1080p

8.7" x 6.5 " x 1.6"

(225 x 166 x 40mm)

5.7" x 3.7" x 1.5"

(145 x 96 x 37mm)

28.2 oz.

(800grams)

10.6 oz.

(300grams)

2 Year Parts and Labor

F - 131

C + 55

10% to 95 % RH (no condensation)

5V DC 1200mA Regulated

(External)

Power Consumption: 500mA maximum (Transmitter)

150mA maximum (Receiver)

100v / 60Hz / 5.0vdc / 1,200mA

English Version

EVICES

http://www.directconnecthome.com

3 / 8

(45m)

@ 1080P

(Output)

(Receiver)